Speaker sizes for 14 speaker system…

[Cruising68]

Thanks! That is what I figured I would have to do….

Certainly not ideal but I have had zero leaks or problems in 3 years. Good luck on the upgrade.


Sent from my iPad using Tapatalk

 

[-REDRUM-]

Okay guys… I need your help! Got everything installed and wired up but it won’t turn on? The radio says “power off” and won’t turn on. I have 12v at the LC2i and both amps… I have checked the fuses mentioned in other posts (amp fuses #115 and #127 & ACM fuse #32) and all are good. Does the LC2i need a remote in? I figured it would auto sense… Any guidance would be greatly appreciated!

 

[Cruising68]

Okay guys… I need your help! Got everything installed and wired up but it won’t turn on? The radio says “power off” and won’t turn on. I have 12v at the LC2i and both amps… I have checked the fuses mentioned in other posts (amp fuses #115 and #127 & ACM fuse #32) and all are good. Does the LC2i need a remote in? I figured it would auto sense… Any guidance would be greatly appreciated!

You saying the oem head unit will not turn on?


Sent from my iPad using Tapatalk

 

[-REDRUM-]

It turns on but the radio doesn’t turn on… it just stays audio off.

 

[Cruising68]

It turns on but the radio doesn’t turn on… it just stays audio off.

Gotta be a loose wire somewhere imo. I assume pushing the on/off button sends a signal over the can bus to the oem amp telling it to turn on.

I used a Zen unit to tap all the channels so two plugs to plug in and the wiring from the amp was done.


Sent from my iPhone using Tapatalk

 

[Cdubya]

If your audio won't turn on in Sync, it has nothing to do with the LC2i which has auto-turn-on by default. It sounds like your ACM isn't working. Can you pull codes? Did you mess with that at all? Where did you pull you signal from?