Search results

Yea...he went 10.9x

I was working on my sound deadener project today and pulled the sub enclosure out so I figured I would slap some scrap CLD on it to see if it would improve things. The oem plastic enclosure is thin and sounds like an empty beer can when you tap on it. Deadening it, along with the rest of the...

More sound deadening. I didn’t even try for 100% CLD coverage here...there’s way more than enough. There’s a LOT of crap behind these panels too. I spent more time removing stuff than putting in CLD and CCF. I added CLD and CCF to the rear ac ducting...they definitely needed some mass added and...

There’s no difference.

He asked specifically about power. There are a multitude of physical differences.

Could be a number of things...from manufacturing tolerances to the way you have your audio settings set up. I’ve checked quite a few...it’s the door panels.

Tuning

It’s not a defect, it’s caused by the door panels. If you were to remove one, hold it up and tap the panel with a knuckle you would hear all the rattles due to the way the panels are constructed. Those rattles translate into audible noises when the speakers are working. It can be fixed with a...

Nope. Oem mufflers aren’t a restriction.

No retune will be needed with his mods.

You won’t pick up a single thing from the Borla exhaust but a change in sound. It’s the same size tubing as OEM.

Not my favorite pic...hasn’t even been washed in 3 weeks...still looks good to me.

1...it sucks 2...it sucks 3...driver side is easy 4...passenger side sucks 5...cut the bands and wiggle the heat shield until the tack weld on top out of sight breaks, remove the heat shield then you can see the bolts 6...that sucks 7...bad 8...no way in hell I’d try it on jackstands 9...why...

I feel both of y’all. I spent way too many years doing this crap.

I put one of the metal base plates on the bottom of the center console insert...figured it would be easy storage and easy to grab. Then I figured out on accident it’ll connect from there so I don’t even touch it anymore.

I wanted to do direct port Meth on my blown 6.1 Hemi Ram...sold it before I got the chance. Had to settle for the normal way to inject it. Yours looks better.

Any 315 MHz sensor will work. Full sets are $40 give or take on eBay.

I’ve rearranged more pistons than I care to remember over the years. 10/10 do not recommend.

I sold mine for $2000...they seem to have gone down now that more people are going aftermarket and selling theirs. You’ll keep them for a long time at $2500.

37.5 offset