Search results

I have 119K tuned miles on my car (124 total) with probably 90 or more on E50. My oil gets changed when the dash lights up…car runs perfect. Never had the first additive in the tank.

There should be no coatings on the lug studs or nuts…so some light rust before install is perfectly fine.

Tidal wired in at 24 bit/192 kHz is as good as you’ll ever need. We do audio competitions at that level.

What you just wrote is most of the problem…Bluetooth. Once you have trash in…you will always have trash out. Same applies to low bit rate wired streaming, satellite radio or any other low res source.

I have zero regrets. Wish I had done it sooner.

I do all my own work but I’ve never held a set of those DP’s. I love the idea of the shielding on them but don’t know how it’s attached…you’d definitely have to remove it up to the first bend to replicate what I did.

If you lift the car and have the wheels hanging you can reach up and loosen the bolt and gravity will do the work for you. Make sure to be safe and have the car on stands and don’t put your hands anywhere they shouldn’t be but after that you can tighten everything up, have them set the toe...

You need a better shop…period.

Seats are sold as individual parts, not assemblies. Your best bet is to shop the used market.

That’s my original custom 3” from way before there were any on the market. This is current with UQ’s and Thermal 3”

That is the catalytic converter assembly…it’s 100% covered under federal emission warranty to 8 years or 80K miles.

One of the most common failure points on these cars. With your mileage warranty will cover it.

Bruce nailed it with the Classic…I’m really surprised more people aren’t running them. They’re OEM+ perfection.

I don’t have a photo to share.

That will depend on the hub thickness of your wheel. If you get 10 full threads of engagement, you’ll be good. Anything less and I’d swap them.

My question is, why not run the 30mm on all 4 corners where they will fit just fine and not worry about cutting the studs at all?

All factory ST wheels will clear with the 30mm spacers.