Search results

This color would be LOVELY with paint-matched fenders, side skirts, and bumpers.

I know this doesn't answer your question, but 5000-ish miles later, still running good over here.

It will if you don't have a rear bar to compensate. Although with all wheel drive and even with my Steeda bar in the stiffest setting this truck STILL understeers unless you snap correct to force it to break loose. The Steeda rear Bar is also 1" in diameter and 4x as stiff as stock according to...

Yup. Side by side with the FenFab unit is obvious who is the professional welder and who isn't but I'm still pretty proud of it. No kit, just pieces of 2.75" 16Ga aluminum tubing. I didn't look, but my calipers read an OD of ~ 2.75" (and the same piece of silicone fits just as snugly on my...

As alluded to by both @TMac and @UNBROKEN , I did some measuring and did some refinements to my tune post charge pipe install--since I made my own, I definitely think the upgrade was worth it. I tried to use even smaller radii than FenFab and used bigger diameter tubing as well. knowing what...

first gen bar and H&R springs had fitment issues... (revised bar design alleviated the issue) but really there was no reason for the clearances to be that close to begin with. I chopped off my last two holes (middle and softest settings) just for peace of mind.

I really want this hood but nobody has explained to me yet how it works when you get the vented version and if it gets rained on/washed/wet. Where does the water go? Does it just drip down into your engine bay? Are there channels to flow the water away from the electric bits? Also, does the hood...

Hopefully they take some lessons from Steeda. I know zero people who aren't on the stiffest setting, so making a 3-position bar is pointless AND if you lop off those two extra holes it gives alot more room for lowering springs and you don't get the rub that some customers had.

The spacers are having ZERO effect on the negative camber people are seeing in that pic. They are just pushing the wheel further outboard so its a little more visible as you have the fender to sight along and give a point of reference. An alignment shop will let you know if you are within spec...

So now the question is... when are you getting an engraved aluminum overlay made to put on the Z3 so the lettering is facing the correct direction? You know that a decal isn't going to cut it after a bit and you will start feeling that twitch in the back of your brain.

My local dealer is selling for between $2500 and $5000 markup over MSRP for any ST on the lot. Its really disheartening and shady and makes me glad I bent them over a barrell in April '20 when I got mine and they were begging for a sale.

Dang.... that setup is gonna be LOUD. [rockon]

you don't need to. go to any auto parts store and pick up a platic christmas tree fender plug--the only color they come in is flat black - perfect match. you might have to poke around to find the right size but they should have a big selection to choose from

There is like three other threads I have tried to explain this to people on but it keeps falling on deaf ears. The stock snorkel shroud is sealed against the radiator and provides a perfect low moisture exposure and high pressure zone for feeding whatever filter you put behind it. It was very...

Is anyone on here still getting the clunk midway through the pedal travel or do most just have the whooshing noise?

The fit is actually surprisingly amazing. Plus you can always wrap it before install to be whatever you want... wood grain, brushed aluminum, or forged carbon

A+ Auto Styling. https://aplusautostyling.com/ Total pros but a little bit of a hike for you.

Tint is always measured ignoring the factory tint, so yes. The pics below are XPEL XR+ 20% all the way around except for front side windows those were revised to 5% since the initial install because the factory tint on those two windows is lighter, and the gradient between the front and the back...

PIU brakes are Street Pack brakes. Just not red.

Look for Vibrant Flex Joint https://vibrantperformance.com/catalog/index.php?cPath=1527_1064_1114 Ballpark is $30 - $50 ea.