• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


ST Accessories/Modifications

JohnE

JohnE

Active Member
#61
Messages
513
Reactions
284
Points
82
Location
Vancouver, WA, USA
#61
Ashpian52 said:
How does that secure in the console? Will it be able to resist someone trying to open it? Those bolts look a bit like knuckle busters.
Click to expand...
The bolts screw into the sides of the console to hold it in place. It fits in there tightly and it has to be forced in all the way before the bolts are put in. The bolts are raised by a boss and are screwed in all the way. I see what you mean about the bolts being knuckle busters but it hasn’t been a problem.
 

A

Ashpian52

Member
#62
Messages
78
Reactions
97
Points
17
Location
Savannah, GA, USA
#62
JohnE said:
The bolts screw into the sides of the console to hold it in place. It fits in there tightly and it has to be forced in all the way before the bolts are put in. The bolts are raised by a boss and are screwed in all the way. I see what you mean about the bolts being knuckle busters but it hasn’t been a problem.
Click to expand...
For some reason I expected there to be a bolt on the bottom that went into the frame that's all. I still think I will still pick this up. Seems like a good place to store the wheel lock and my 911 when I can't take it with me.

Looks good!
 

My ST is Better!

My ST is Better!

Member
U.S. Army Veteran
#63
Messages
102
Reactions
61
Points
27
Location
Chicago, IL, USA
#63
Cdubya said:
Ford window deflectors. ~$85. Nice now that warm weather is here. Allows you to crack the window open 2-3" in the rain. I think it looks good on an ST.
Click to expand...
Those are pretty cool I like!! Could you please post the link?
 

Last edited:
R

Rossi6998

Member
#64
Messages
65
Reactions
47
Points
17
Location
Surprise, AZ, USA
#64
JohnE said:
Vehicle specific locking safe and used my Ford Pass points. There are cutouts so the inside light still illuminates. It took less than five minutes to install.


View attachment 1565 View attachment 1566
Click to expand...
I installed the console safe also. I went online and purchased some rubber/plastic caps to slip over the bolts so I don't scratch my hands or the items I put in the console.
 

JohnE

JohnE

Active Member
#65
Messages
513
Reactions
284
Points
82
Location
Vancouver, WA, USA
#65
Rossi6998 said:
I installed the console safe also. I went online and purchased some rubber/plastic caps to slip over the bolts so I don't scratch my hands or the items I put in the console.
Click to expand...
Good idea. I’m not sure why they didn’t just eliminate the standoff, use shorter bolts and screw them in flush to the sides. Probably because the bolts need to be self drilling and are the shortest available.
 

B

Big Turk

Member
#66
Messages
415
Reactions
240
Points
37
Location
Ontario, Canada
#66
Hi, I like this safe installation. I would be concerned with the bolt heads scratching items or my hands too. Why not switch them out for flat head screws after the drilling is done? Cheers.
 

JohnE

JohnE

Active Member
#67
Messages
513
Reactions
284
Points
82
Location
Vancouver, WA, USA
#67
Big Turk said:
Hi, I like this safe installation. I would be concerned with the bolt heads scratching items or my hands too. Why not switch them out for flat head screws after the drilling is done? Cheers.
Click to expand...
There are stand offs/bosses inside of the vault that are threaded and welded to the inside of the vault. That’s what you see in the picture and the head of the screw tightens down flush with the top of the boss. The hole goes all the way through the vault and when the screw is threaded through that boss, it hits the inside of the console and self drills itself through the console, threads into it and secures the vault. That boss limits how far the screw will thread into the console; otherwise it would come out the other side. All those screws do is hold it in place so it can’t be lifted out. The best option will be to put rubber caps over them, which I have and will do.
 

Last edited:
JohnE

JohnE

Active Member
#68
Messages
513
Reactions
284
Points
82
Location
Vancouver, WA, USA
#68
You could cut off both bosses once you have the holes made using those self tapping screws and screw in a very short 1/4 or 3/8 inch screw and screw it down flush. The vault pushes down into the console space very tight and like I said earlier, those screws aren’t supporting anything, they just lock the vault into the space.
 

S

StuHodgkiss

Member
#70
Messages
25
Reactions
9
Points
2
Location
Athens, GA, USA
#70
OP
KegsBdry

KegsBdry

Active Member
Thread Starter #71
Messages
939
Reactions
425
Points
182
Location
WashDC
Thread Starter #71
I park in the city sometimes. And I fear my sweet new ride will get bumped. So after some searching around, I've decided to go with these two additions. The reverse will be put on only when parallel parked; to save myself from busting my knees up.

And I got a tow strap, you never know.

Screenshot_20200806-154432.jpg
Screenshot_20200806-154358.jpg
 

JohnE

JohnE

Active Member
#72
Messages
513
Reactions
284
Points
82
Location
Vancouver, WA, USA
#72
KegsBdry said:
I park in the city sometimes. And I fear my sweet new ride will get bumped. So after some searching around, I've decided to go with these two additions. The reverse will be put on only when parallel parked; to save myself from busting my knees up.

And I got a tow strap, you never know.

View attachment 1629
View attachment 1630
Click to expand...
Like it!
 

Frank T.

Frank T.

Member
#74
Messages
143
Reactions
69
Points
27
Location
Grimsby, ON, Canada
#74
KegsBdry said:
I park in the city sometimes. And I fear my sweet new ride will get bumped. So after some searching around, I've decided to go with these two additions. The reverse will be put on only when parallel parked; to save myself from busting my knees up.

And I got a tow strap, you never know.

View attachment 1629
View attachment 1630 can you please post where you got the front plate bumper Thingy?...thanks
Click to expand...
 

OP
KegsBdry

KegsBdry

Active Member
Thread Starter #75
Messages
939
Reactions
425
Points
182
Location
WashDC
Thread Starter #75
Yungty718

Yungty718

Member
#76
Messages
209
Reactions
76
Points
27
Location
New York
#76
KegsBdry said:
amazon has it. https://www.amazon.com/4Bumpers-DUO-License-Bumper-Protector/dp/B005CJ0824/ref=sr_1_22?dchild=1&keywords=front+license+plate+parking+bumper&qid=1596802882&sr=8-22

It can be found cheaper on other sites though.
Click to expand...
I had gotten the other one from their website, just make sure you get some anti theft license plate screws for it as well. Local pep boys or autozone. just know that hitch weighs about 15lbs



Sent from my iPhone using Tapatalk
 

OP
KegsBdry

KegsBdry

Active Member
Thread Starter #77
Messages
939
Reactions
425
Points
182
Location
WashDC
Thread Starter #77
Yungty718 said:
I had gotten the other one from their website, just make sure you get some anti theft license plate screws for it as well. Local pep boys or autozone. just know that hitch weighs about 15lbs



Sent from my iPhone using Tapatalk
Click to expand...
Good idea!

I noticed the weight straight away. Damn, it's heavy.
 

Yungty718

Yungty718

Member
#78
Messages
209
Reactions
76
Points
27
Location
New York
#78
KegsBdry said:
Good idea!

I noticed the weight straight away. Damn, it's heavy.
Click to expand...
Yes sir! It’s a solid piece of metal!


Sent from my iPhone using Tapatalk
 

ChristianGMoore

ChristianGMoore

New Member
#79
Messages
13
Reactions
3
Points
2
Location
Cincinnati, OH, USA
#79
anyone get a cargo container for their roof rack yet? Looking to get one that would actually fit either an Expedition or my Explorer ST.
 

OP
KegsBdry

KegsBdry

Active Member
Thread Starter #80
Messages
939
Reactions
425
Points
182
Location
WashDC
Thread Starter #80
ChristianGMoore said:
anyone get a cargo container for their roof rack yet? Looking to get one that would actually fit either an Expedition or my Explorer ST.
Click to expand...
I got this one because I didn't want to spend a lot & I didn't want to buy cross bars. Plus, I have the big sunroof / antenna to work around.

1597242842574.png
 

You must log in or register to reply here.

Explorer ST Posts



Top