Forscan settings discussion

[Bwisi96]

How about the Enhanced exhaust noise or piped in fake engine sound on the ST in sport mode? Has anyone disabled that yet or know how to do it?

I’ve test driven one and that’s the best one I’ve heard from ford. The one in the fusion sport is just trash, the mustang eb is also trash. Still I’d turn it off also.


Sent from my iPhone using Tapatalk

 

[kartman]

How about the Enhanced exhaust noise or piped in fake engine sound on the ST in sport mode? Has anyone disabled that yet or know how to do it?

This, fake engine noise is terrible.

 

[GBVx]

Just FYI, A lot of the things addressed in this thread have been discussed, and mostly fixed over on explorerforum.com

 

[Bwisi96]

This, fake engine noise is terrible.

Take a fusion sport for a test drive in sport. You’ll love the one in the explorer


Sent from my iPhone using Tapatalk

 

[SilverST]

which section is this under? I was looking for this, but couldn't find it

 

[Decoynj66]

Turn off fake engine noise in Forscan.....It's under ASM....change the 4 to 0

 

[LokiWolf]

Turn off fake engine noise in Forscan.....It's under ASM....change the 4 to 0 View attachment 3833

Are you sure? Pretty sure that turns all alerts volume to zero...


Sent from my iPhone using Tapatalk Pro

 

[Decoynj66]

Are you sure? Pretty sure that turns all alerts volume to zero...


Sent from my iPhone using Tapatalk Pro

Are you sure? Pretty sure that turns all alerts volume to zero...


Sent from my iPhone using Tapatalk Pro

It's the same setting for F-150. I found multiple people said thats the setting.. I turned it off on mine. Not sure what alerts your asking about?

 

[wayanbros]

Turn off fake engine noise in Forscan.....It's under ASM....change the 4 to 0

Confirming that this worked. My cabin is eerily silent until I get my exhaust work done next week.

 

[LokiWolf]

Confirming that this worked. My cabin is eerily silent until I get my exhaust work done next week.

But did it turn all alerts down? Including parking?


Sent from my iPhone using Tapatalk Pro

 

[blaster9]

But did it turn all alerts down? Including parking?


Sent from my iPhone using Tapatalk Pro

i can confirm that parking alerts still work after disabling augmented Vroom Vroom sound. It's now pleasantly quiet but when you get on it, it's got a bit of a supercharger whine (music to my ears) which was never audible before i disabled the fake crap. I can also hear the blow off from my VTA BOV adapter nicely too.

 

[LokiWolf]

i can confirm that parking alerts still work after disabling augmented Vroom Vroom sound. It's now pleasantly quiet but when you get on it, it's got a bit of a supercharger whine (music to my ears) which was never audible before i disabled the fake crap. I can also hear the blow off from my VTA BOV adapter nicely too.

Good stuff! Gonna make the change then! Thanks!


Sent from my iPhone using Tapatalk Pro

 

[blaster9]

Has anyone heard of a way to do any of the following via FORScan:

• Utilize the full screen for camera views (and not just the top half)
• Enable front camera at any speed (disable speed-limiting component)
• Show temperatures on gauges
• Show battery voltage
• Disable no hands on wheel alert for intelli cruise/wheel centering
• Remember your pre-collision settings even after key cycle (truck always defaults to all on for pre-collision settings)

 

[wayanbros]

Has anyone heard of a way to do any of the following via FORScan:

• Utilize the full screen for camera views (and not just the top half)
• Enable front camera at any speed (disable speed-limiting component)
• Show temperatures on gauges
• Show battery voltage
• Disable no hands on wheel alert for intelli cruise/wheel centering
• Remember your pre-collision settings even after key cycle (truck always defaults to all on for pre-collision settings)

The camera view is a UI problem. I bet a Sync redesign update would be required.

I’ll jump back in and check for the rest. FORScan is so archaic its painful to use.

 

[jeffgoetz1]

Turn off fake engine noise in Forscan.....It's under ASM....change the 4 to 0 View attachment 3833

Where is ASM? I can find the 726-xx-xx designations, but no 727's

 

[LokiWolf]

Has anyone heard of a way to do any of the following via FORScan:

• Utilize the full screen for camera views (and not just the top half)
• Enable front camera at any speed (disable speed-limiting component)
• Show temperatures on gauges
• Show battery voltage
• Disable no hands on wheel alert for intelli cruise/wheel centering
• Remember your pre-collision settings even after key cycle (truck always defaults to all on for pre-collision settings)

Nope.

None of those are doable on ours at this moment...

Front camera should be in theory doable, but finding then coding would be the challenge.


Sent from my iPhone using Tapatalk Pro

 

[HooDude]

Where is ASM? I can find the 726-xx-xx designations, but no 727's

That's a typo. It's actually ACM. And set the number to 9 instead of 0, because 0 will disable your center dash speaker.

 

[blaster9]

That's a typo. It's actually ACM. And set the number to 9 instead of 0, because 0 will disable your center dash speaker.

i saw a DTC related to speaker and i'm betting this will be fixed by changing the 0 to a 9 as you suggested. Gunna try it tn

 

[blaster9]

That's a typo. It's actually ACM. And set the number to 9 instead of 0, because 0 will disable your center dash speaker.

Seems to have worked and the center speaker is on so thx for the tip!

 

[HooDude]

Seems to have worked and the center speaker is on so thx for the tip!

I'm glad it worked for you!