Carroll Shelby CS10 (20x9.5, 37mm offset)

[jwuonog]

I saw a great price on these wheels and liked how they looked. Would they work on our cars? Would a 295/40/20 fit on these?

https://www.americanmuscle.com/shelby-mustang-cs10-gloss-black-wheel-20x95-cs10-295530-b.html

 

[2020FordRaptor]

I saw a great price on these wheels and liked how they looked. Would they work on our cars? Would a 295/40/20 fit on these?

https://www.americanmuscle.com/shelby-mustang-cs10-gloss-black-wheel-20x95-cs10-295530-b.html

You’d want a 295/45r20 on 20” wheels, fits better IMO. That offset is too high, it’d be tucked in the fenders.

 

[jwuonog]

You’d want a 295/45r20 on 20” wheels, fits better IMO. That offset is too high, it’d be tucked in the fenders.

Would it be even more tucked than stock?

 

[2020FordRaptor]

Would it be even more tucked than stock?

It would be pretty much the same, maybe a quarter inch less tucked but it’s not going to be a noticeable difference.

 

[UNBROKEN]

Would it be even more tucked than stock?

About the same give or take a few mm

 

[jwuonog]

I'm OK with it being the same. The stock fitment never really bothered me. It's my wife's daily.

I called Holley and confirmed that the load rating is 1929 lbs per wheel.

 

[jwuonog]

I went ahead and ordered. I also ordered a 7mm spacer and hub centric rings. Here's the only pics of the wheel on a car that I could find:


I also got some General G-Max AS-07 in 295/45/20. It's pretty close to the same diameter as my OEM 21s, so hopefully it doesn't look too silly on the stock suspension.

 

[2020FordRaptor]

Keep us updated with pics when it comes in.

 

[jwuonog]

They're here! 7mm spacer and hubcentric ring coming later. That should effectively make the fitment the same as a +30 offset, right? This is my first time venturing out of the norm and buying a wheel that nobody has tried.

I also ordered a set of OEM Motorcraft TPMS sensors. The part number is JX7Z-1A189-C, TPMS-60. I have a set of Amazon ones that supposedly work, but I'd rather not deal with the headache.

I should be able to get a pic of the wheel on the car tomorrow (no tire mounted yet).

 

[2020FordRaptor]

They're here! 7mm spacer and hubcentric ring coming later. That should effectively make the fitment the same as a +30 offset, right? This is my first time venturing out of the norm and buying a wheel that nobody has tried.

I also ordered a set of OEM Motorcraft TPMS sensors. The part number is JX7Z-1A189-C, TPMS-60. I have a set of Amazon ones that supposedly work, but I'd rather not deal with the headache.

I should be able to get a pic of the wheel on the car tomorrow (no tire mounted yet).

View attachment 30138

Well that would make it +30 offset but it wouldn’t make it near flush at all.