2025+ Ford Explorer Spreadsheet now available!

[Nightshade]

Below is the link to the updated FORScan changes that is currently available for our 2025+ Ford Explorer and applies to all trims for those who don't have an ST. This one is for us, which helps compile all into one.

Keep in mind that the sheet will be updated by @powerboatr and @Nightshade (myself). If you're interested in something that isn't on the sheet yet, just reach out to myself or @powerboatr or comment on this thread.

LINK: https://docs.google.com/spreadsheet...bxZh92wdcE/edit?gid=1931803578#gid=1931803578


--DISCLAIMER; for those asking me regarding the turn signals to change from 3-clicks to let's say 5-clicks, it won't be possible. I looked into this myself and the issue is that the signal stalk on the 2020+ Explorers are using a slightly older stalk so issue isn't just software, but also hardware. So in saying this, changing the turn signals in FORScan will not be possible for the 2020+ Explorers for the unforeseeable future.

 

[RFord78]

Following

 

[Mako]

Is it really not possible to have the amber light on while in park?

I’ve also seen people running only the amber light without the side marker on. On my car, the side marker always comes on with the amber. Do you know if they disable it using FORScan as well?

One last thing, when would you want to use the DRL full brightness mod?

 

[MichaelTM]

So. I have a 25ST and I've changed the drls, the fog and high beams. And I also wanted to change the Allow cam in any motion so I went and saved the as-built did everything requested restarted the ignition and it works, but my speakers have started crackling and popping randomly at any volume, is there something I could've missed or messed up? I hard restarted my radio and I also reverted as built file and I also loaded in the factory ACM file and nothing is working and its been stressing me out. But why would changing the camera at any motion and speed affect my speakers? Any help would be amazing! I changed 7D0-02-02 xxx3 it was 2 to start with

 

[genericjeff]

Anyone find where to add the keyless entry in forscan ? I found them available, but hate to give the dealer $ when I have a forscan that ive been able to use on my last dozen vehicles.

 

[포드링컨]

Can I share a 23-year-old Aviator Threadsheet?

 

[Nightshade]

Is it really not possible to have the amber light on while in park?

I’ve also seen people running only the amber light without the side marker on. On my car, the side marker always comes on with the amber. Do you know if they disable it using FORScan as well?

One last thing, when would you want to use the DRL full brightness mod?

You can only run ambers in either drive or neutral. As for ambers without side marker on, you need to disable "Allow brake lights to turn on with DRL" in BdyCM module (easy way, not asbuilt). When you disable this, it'll turn off your rear parking mode in daytime DRL mode and the front headlight side markers.

DRL full brightness only works when its dark and white LED bar is on + headlight knob set to switch 2 which doesn't turn on your low beams at night); can be used in all modes at night.

 

[Nightshade]

So. I have a 25ST and I've changed the drls, the fog and high beams. And I also wanted to change the Allow cam in any motion so I went and saved the as-built did everything requested restarted the ignition and it works, but my speakers have started crackling and popping randomly at any volume, is there something I could've missed or messed up? I hard restarted my radio and I also reverted as built file and I also loaded in the factory ACM file and nothing is working and its been stressing me out. But why would changing the camera at any motion and speed affect my speakers? Any help would be amazing! I changed 7D0-02-02 xxx3 it was 2 to start with

Cams in motion is already enabled by default from factory and is a separate module than your speakers. Speakers are under ACM module. Any chance you disabled the fake engine noise in FORScan before?

 

[Nightshade]

Anyone find where to add the keyless entry in forscan ? I found them available, but hate to give the dealer $ when I have a forscan that ive been able to use on my last dozen vehicles.

Very easy to do. Do the following after it's installed:

Step 1: Enabled "Keypad" in BdyCM which enables the hardware itself (use Keypad in search bar in BdyCM module in easy mode, not asbuilt)

Step 2: Enabled "Keypad" in APIM successfully, enables the option in your infotainment screen.

Step 3: Perform the BdyCM Local Interconnect Network New Module Calibration (will be in the wrench icon on the left bar in FORScan).