1.25" wheel spacer, stud trimming

[WETZMS3]

I've seen plenty of posts mentioning the need to trim wheel studs with the popular package from Lethal.

Does anyone know what wheel studs are used in this design?

Would it be smarter/easier to source proper length studs and press the provided ones out for a proper length/strength?

Open ended lugs are always an option, just curious about others opinions on a better solution than hacking up new studs.

 

[2020FordRaptor]

With 1.25” spacers you don’t need to trim the studs at all.

 

[WETZMS3]

With 1.25” spacers you don’t need to trim the studs at all.

1"? When is trimming needed?

 

[2020FordRaptor]

1"? When is trimming needed?

Yes, 1” is when you need to trim. All the info you need is in this article:

http://explorerstenthusiasts.com/2025/07/22/lets-talk-wheel-spacers/

 

[UNBROKEN]

Just go 30mm from Eibach. No trimming and not quite as far past the fender as 1.25. So that on all 4 corners and set rear camber to -.5° and all the wheels will match in the fender.