Search results

Still good? Mine is making a knocking noise that sounds like the front sway bar/links. They don't seem to have any slop in them but ??

Try just tightening up all the nuts. On mine that fixed it. A couple were really loose, most just needed to be snugged. There are 6-8 of the plastic nuts all together. A bit hard to remove but can be done with a combination of pry tool and unscrewing. No need to remove the whole panel. FYI...

These still working OK? Thanks

Check the tow ratings but you should be fine. Be sure the dolly has brakes.

Just got back from a cross country road trip. The last few days had an extremely annoying rattle from the passenger side door area. Thanks to this thread it was an easy fix. One of the stud nuts that holds the heat shield and fiber cover had loosened to almost falling off. Tapping on the fiber...

Just an FYI. On my Mach-e the wind noise at the driver side mirror was driving the wife crazy. Did some research and experimenting and found the wistle was air getting in the crack at the connection of the mirror housing and the door. Fixed with a bead of black caulking in the crack and no more...

Yup, same here. 2023 Explorer w/ no manual… look online they said… :(

If I remember correctly, Chicago had wide spread flooding the weekend of the NASCAR street race. Would not be surprised if it flooded the "storage facility" at the track.

Worked as expected. (After upgrading Forscan) Thanks again!

Thanks, I’ll give it a try tomorrow.

Make sure ALL the files from the file extraction made it to the thumb drive.

Do you know if you can make the white DRL stay on during blinker activation? Tx

Thanks for the info. Sounds like the bad connection can happen at any time so even if mine is fine now it could start failing at anytime Good luck to all of you that are waiting on delivery.

My mistake, I guess this thread was when you were wanting to buy it.

Probably should be in want to sell area, and a ? at the end of the sentence. ??

Installed the Steeda diff brace. Peace of mind has returned...

Installed mine yesterday. Install went well except the upper/outer diff bolts were a PIA to tighten. My 13mm end wrench wouldn't fit the E-head bolt and it's too narrow for socket. Going to get a E-18 end wrench to finish tightening them. Otherwise it looks great and peace of mind is at hand!

I for one like the chrome lugnuts, they match the other shiny bits on the car :cool:

im curious too since I ordered a week ago.