Search results for query: forscan

Other explorers dont get that?

Houston Speed Freaks rear swaybar Steeda rear subframe bushing brace kit FenFab billet vertical links Steeda adjustable toe links Drop springs of your choice Check to see if there’s any Forscan mods to firm up the electric steering rack like the ST does when in Sport mode.

...differ based on different performance potential as you don't want the system too be too sensitive. So i'm speculating the differences in the forScan programming are long the same lines tweaking the code for difference such as weight of vehicle, brake type, etc. Intrigued at what those...

Does anyone have insight into the ABS brakes settings, under the abs module coding? there is a calibration for "police", any real answer on the difference between that and the ST cal? The police interceptors have the same brake system size, only a changed pad which is still used and available...

...like an LC2i since this I assume will be a passive system. That will let you run a 4 channel for the doors and mono for the sub. Just use Forscan to flatten the oem signal. Take the money you had earmarked for the d pillars and 8” sub and put that towards some basic sound treatments for the...

...Ensure that if the fog lights are on, they both operate at the same time (no more "one-eye" look). Has anyone successfully done this via FORScan? If you have the specific module (BdyCM?) and the lines of code or the "easy mode" setting names, I would really appreciate the help! Thanks in...

You might try just tightening the bolts on the module or backing them off and tiretightening them a few times and see if that’s good for a while before you can make time to do a better fix

thank you so much for making the account and letting me know I helped you out. If i just help 1 person then it’s all worth it for me to document and share. So glad i could help!

...it could be the speed sensor in the front diff so I spent $230 at my local ford dealer for the sensor and fluid. Luckily I held off and got forscan instead (which is great so I can still return the sensor and fluid). I came across your post and saw the part about irregular voltage, sure...

It seems like I have read, at least on the pre-2025, people could use forscan to modify the APIM and or ACM to remove the factory DSP settings, and make the output from the amp a traditional linear output (no roll off). I guess my question is, am I reading that right? Can you change a...

They are holding up good. I had to use forscan to change the time the power outlet stay on for after the car is shut off. They turn off after 30 seconds.when I did the install I bought 2 sets just so I can have extra parts if I had any failures.

...with the music and muddied the sound system. I'm hoping to disable the FENG/ANC purely to clean up the signal for the B&O speakers, rather than to change how the engine sounds. I’ll definitely check that '25 ForScan thread to see if anyone has cracked the code for the audio processing yet...

Any mods via FORSCAN have been hit or miss, you should check the '25 Forscan thread for posts regarding it. As for me I just slapped on CVFAB Downpipes & a Thermal R&D 3" exhaust and it became a moot issue...

So I ran through the non-forscan epb maintenance procedure a few times to try to release/reset it (and maybe shake things loose) and then drove it for a couple minutes. The rotor was the same temp as the other side and didn't appear to be dragging any longer, so maybe??? I got it fixed? I'll...

...3mm while the inner is 6 to 7. Grabbed the laptop and hooked it up, then tried to run the maintenance procedure to retract the epbs within forscan. Unfortunately, this failed midway through the procedure. I've got a couple codes related to that actuator now: c1034 and c2005. Anybody...

I've been digging through the spreadsheet looking for the right place to turn on my fog lights all the time. Thinking to turn them on with the DRL's, is the correct spot to do this?

It is not. You can enable Bambi mode with Forscan to keep the high, low and fog lights all on at once…that’s a pretty nice increase.

Anyone figure out why this is happening? Mine shows up the same, forscan is up todate. i have one of the recommended obd vlinker cables.

I bought mine from 4DTECH, well worth it. Super easy/quick to install.

It very well might be the OTS tune, I’d highly recommend a custom tune. If you think its the adaptive transmission learning tables, you can reset those with Forscan.