What Have You Done To Your Explorer ST Today

[Mass_ST]

A few weeks ago I picked up a set of 22x10.5 Niche Prodigy 5 Wheels. I haven’t had time to get good pictures, but here a few pics from the cell.

 

[UNBROKEN]

Finished the last little trim piece in the false floor fifteen build.

 

[DaGooch]

These look nice. Are these 22x9 with a +38mm offset? What size tire did you end up putting on?

A few weeks ago I picked up a set of 22x10.5 Niche Prodigy 5 Wheels. I haven’t had time to get good pictures, but here a few pics from the cell. View attachment 30017 View attachment 30018

 

[Mass_ST]

These look nice. Are these 22x9 with a +38mm offset? What size tire did you end up putting on?

Thanks! They’re 22x10.5 with 38mm offset. Tires are 285 40 22 And I’m lowered on eibach springs. Rides great with no rubbing at full lock forward and reverse.

 

[Sir Wafflefries]

Finished the last little trim piece in the false floor fifteen build.
View attachment 30019

Gorgeous.

Did you custom make the sub enclosure yourself, or have it made?

 

[UNBROKEN]

Gorgeous.

Did you custom make the sub enclosure yourself, or have it made?

I do all my own work. This was documented in my build log here.

 

[Sir Wafflefries]

I do all my own work. This was documented in my build log here.

Did you mean earlier in this thread, or were you trying to link me a thread?

 

[BrooseDaMoose]

Did you mean earlier in this thread, or were you trying to link me a thread?

His build thread is here. Happy reading. I hope you've got a minute or two! LOL!!

 

[lsxd]

Got the Explorer mats used, got them home and scrubbed them down and cleaned them and installed. Nothing crazy, but it's the first thing Ive done to mine since buying it a couple weeks ago. Just wana track down the 3rd row mat and rear now.

 

[SickSix]

Got the Explorer mats used, got them home and scrubbed them down and cleaned them and installed. Nothing crazy, but it's the first thing Ive done to mine since buying it a couple weeks ago. Just wana track down the 3rd row mat and rear now.

If you bought it new, you should have Ford Pass points coming soon that can be used to buy the 3rd row mats from Ford.

-------
Added some lens tint. Not sure if I will keep the rear though, in certain light it looks too dark and will probably attract unwanted attention.

 

[lsxd]

If you bought it new, you should have Ford Pass points coming soon that can be used to buy the 3rd row mats from Ford.

-------
Added some lens tint. Not sure if I will keep the rear though, in certain light it looks too dark and will probably attract unwanted attention.
View attachment 30270
View attachment 30271

Looks great

I keep checking but nothing has showed up on the app yet. I picked it up July 10th so imma give it the 30 days and if still nothing ill call the dealer.

 

[spike5150]

Installed Steeda Rear Sway bar. Amazing difference. Also discovered these handy slots to hold the bar brackets to make starting the bolts much easier.

 

[V3nom3nom]

Swapped out a bad purge valve at 55k on a 2020. This thing is a PITA to swap. Little to no room but with a small 90* pick it can be done in about 30ish mins.

 

[STeiner]

Added some lens tint. Not sure if I will keep the rear though, in certain light it looks too dark and will probably attract unwanted attention.

Where did you get the lens tint, if I may ask?

 

[SickSix]

Where did you get the lens tint, if I may ask?

ocdplug.com. They also have an Etsy page.

 

[RFC1992]

Installed Steeda Rear Sway bar. Amazing difference. Also discovered these handy slots to hold the bar brackets to make starting the bolts much easier.
View attachment 30349

I did the same and noticed a difference right away. While it took me an embarrassingly long time to install, I was pleased with the result. I did sand, primer, and paint the bar grey -- I did not want the blue peeking out of the fender well.