Install J&L catch can

[tuna5589]

2025 Explorer ST Trying to install J&L catch can, but there instructions don't match the 2025. I have finally gotten the can mounted but am struggling to remove the hoses from the engine. How do you do it, there not like what they show in there video.

 

[Caster]

I have a UPR oil catch can on my 25'. Look up their installation video on their website and that might be the help you need.

 

[Combatvet]

Your best bet is to look at the UPR catch can install video, and then the FENFAB V2 video from HSF. Those two videos will show you how to handle removing and cutting some of the hard plastic hoses our vehicles use.

 

[tuna5589]

Caster, thanks for the reply. What did you have to do to remove the hose connectors. I don't seem to be able to figure out how they come out. I don't want to ruin them.

 

[RFC1992]

When I installed on the 2025, no hose cutting was required.

I do recall an over/under routing.of the new hoses. Check the pics below.

 

[Caster]

Caster, thanks for the reply. What did you have to do to remove the hose connectors. I don't seem to be able to figure out how they come out. I don't want to ruin them.

Its hard to remember because it was in July of 2024 but I believe I cut the OEM fitting and locking tab apart with a pair of dyke cutters in order to remove it. The UPR kit I purchased came with new hoses with connectiors that are push tab removable.

 

[tuna5589]

With what I could find that appears to be the only way to remove them. I had found a statement that said they were not supposed to ever be removed. I didn't really want to do that.