• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Auto up windows not going up to close always.

Messages
32
Reactions
13
Points
2
Location
Sacramento
Vehicle
2020 Explorer ST
#1
I have a 2020 ST sometimes the front windows occasionally will bounce back down after going up. I have to keep resetting them by holding the toggle switch up for three seconds after the window reaches the top. Seems like a software glitch. Any ideas?
 

l1tech

Member
U.S. Army Veteran
Messages
118
Reactions
67
Points
27
Location
AZ
Vehicle
21 ST
#2
Your not following the reset procedure correctly. Here it is directly from the Ford manual

  1. Start the engine.
  1. Press and hold the window control switch until the door window is fully open.
  1. Release the window control switch.
  1. NOTE: All of the remaining steps must be carried out within 30 seconds from start to finish.
    Lift and hold the window control switch until the door window stalls in the fully closed position for 2 seconds.
  1. Release the window control switch.
  1. Press and hold the window control switch until the door window stalls in the fully open position for 2 seconds.
  1. Release the window control switch.
  1. Lift and hold the window control switch until the door window stalls in the fully closed position for 2 seconds.
  1. Test for correct window operation by carrying out the one-touch down and one-touch up features.
 

OP
ST Grey
Messages
32
Reactions
13
Points
2
Location
Sacramento
Vehicle
2020 Explorer ST
Thread Starter #3
I appreciate the reply, will give it a try, thanks.
 

Messages
125
Reactions
51
Points
27
Location
Va
#4
This is great, thanks!

Sent from my SM-N981U using Tapatalk
 



Top