Search results for query: forscan

Is there anyone in the CLT metro area that can help with F Mods full screen jailbreak as well as some Forscan help?

I recently installed a push bar on my 2022 explorer ST and want to disable the front proximity sensors as they go off every time I slow to 5 or under. Is there a way? A simple button? Forscan? Anything?

...The following will need to be changed: 1. Connect your Explorer to FORScan.
 2. Go your BdyCM (easy way, not as-built way). 3. In the search bar on the top left, type in “Approach Detection” (without quotations). 4. Change the following below from Disabled to Enabled: Global Close...

Due to getting a lot of messages about being asked if Approach/Welcome Lighting could be enabled like the 21+ Ford F-150s via FORScan, the answer is YES! This one has been around for a while, and yes, this will work for ALL 2025+ Explorers of ALL trims! I am not 100% sure if this will work for...

...was also damaged. Before repair works everything fine. After the repair, I got the message "No Key Detected." The vehicle battery is new, and the bouth key battery is also new. I have checked all plugs and everything is connected I can't use Forscan because of no Ignition.. What schould I do?

CrazyFord, sent you a PM. I'm in the SE suburbs. I've used FORSCAN to mod both our ST and our Lincoln MKX. Even did the AppleCarPlay/AndroidAuto full screen mod to the center screen. It's all fairly painless/easy. I started modding ECUs with my 2012 Jeep Grand Cherokee. Found out that a good...

Good news! Forscan 2.3.66 has the service procedure to calibrate the 360 degree camera system. Sorry for the bad pics but don't know the screenshot keystrokes for windows on a Mac. Just go to a well marked empty parking lot with clear lines. You do not need a long continuous length but it...

So, what would cause it to not appear on a 4WD model? There are no errors in forscan and running a test on the 4wd module is successful.

I just added about having a forscan It made it a lot easier.

...or zinc plated like standard brake ST calipers. You will need to paint or powder coat them. I used high temp paint a primer. If you have a Forscan it makes the brakes bleed and calibration easier. I scored my calipers and brackets off a 27K wrecked PIU on eBay. I paid roughly $300 for...

The short response to your question and my advisement to you: Don't touch it until more testing is done by @Nightshade You are in the same boat as me with the FENG. My factory ACM 727-01-01 reads as follows: 1031 3099 88C2 Look at my few posts on page 2 for what happens when you change the...

...is making it complicated, once I can get this figured out, I’ll update the thread. In the meantime, I’ve written “In Progress” on the FORScan spreadsheet for this reason. For the changes, any FORScan changes should take effect as soon as you cycle on/off. You can force a module reboot (won’t...

You were able to make the reverse and 360° camera cover the entire screen as a full fit?

I don’t have this issue and didn’t “fix” anything. Just made the changes with Forscan and everything works as it should.

Have you found a fix for this??

Any fix yet?

I used forscan to get Amber DRLs on my 2025. For some reason my turn signal started to sound like its hyper blinking from inside the cabin but my actual turn signals outside is fine. Also my TPMS on the dash doesn't show anymore. I think I messed up some things. Is it something that I messed...

Couldn’t do it with Forscan because it seems hardware limited

I don't know if it was a cost saving strategy or not, but I would be interested in Ford's logic with this. I wonder if it's something we could enable with Forscan?

I believe these chimes can be turned off via ForScan. I briefly made note of this when I was browsing the ForScan tuning thread and was trying to decide if i wanted to eliminate them or not. I'll have to search back and see if I can find them. EDIT: Yes, it appears it can be done via...