Search results for query: forscan

Anyone figure out why this is happening? Mine shows up the same, forscan is up todate. i have one of the recommended obd vlinker cables.

I bought mine from 4DTECH, well worth it. Super easy/quick to install.

It very well might be the OTS tune, I’d highly recommend a custom tune. If you think its the adaptive transmission learning tables, you can reset those with Forscan.

Not sure where Forscan issues get posted. We have 2 2025 explorer STs. I did the amber DRL change in Forscan. Changed the values according to the spreadsheet. Neither explorer has fog lights now. I even changed the values back to the factory setting, and still no fog lights. What the heck did...

Are you sure it threw the codes because of the broken MAP sensor replacement? Mine threw code when I drove in the rain, reset it with FORSCAN, then a couple of months later it threw a code when the temperature dropped significantly, FORSCAN reset again and all is well now. Check your T-Fitting...

...seem impossible for the ground to cause signal issues on the CAN bus that could interfere with the moon roof communication. If you can get forscan to log the AWD module voltage and the battery voltage in oscilloscope mode that should be the clearest definitive way to know is if those...

...stays on whatever style I selected, it won't change until I go in and change it. The auto stop/start can be permanently turned off thru forscan or by buying an add on module like https://www.autostopeliminator.com/products/2025-ford-explorer-autostop-eliminator?_pos=1&_fid=024e1a167&_ss=c I...

...remaining fuel mileage. Regardless, there is something disconnected between the stats. I had disabled Auto-Engine Off since 5K mi in Forscan. I’m at 67K mi. Other modifications were minimal (exhaust and catch can) and I’m on AT tires year round. Add 80% city driving, and my lead foot, there’s...

...the IPC dashboard indicator will not show up when pressing the fog switch and the foglight dosnt work. I activated all related functions in FORScan, but the indicator still doesn’t appear. Here is what I have already changed: BdyCM (regular config): Fog Lamp Switch = Enabled, Fog Lamp...

Hi all, After updating my 2020 Ford Explorer APIM firmware via Forscan: Seat massage stopped working Horn not working Navigation still set to NA I want to either rollback APIM to the previous firmware or change navigation region to the Middle East. My codes: U024B, U024C, U024H, U024G Has...

Which badge is this in the right picture? TIA

Team, i desperately need your expert advice with programming my SYNC3 APIM using FORScan. I just upgraded Sync 2 to Sync 3 module on my 2016 Ford Explorer Platinum. Of note, I removed the factory GPSM antena and replaced with FARKA antena, placed in the same location as GPSM. I am currently...

Go on WOOT and get a cheep $100 computer loptop and install FOSCan, have a nerd set it up for you and your done change what you need.

...into Brake Service Mode or is there a different procedure? Edit: Nevermind, I figured it out. It's the same thing. You just need to connect a battery charger while in the tuning process. If anyone else is trying to figure this out, you can view the procedure in post #5 here or you can use...

Try sending a message to @Nightshade He seems to be the go to for Forscan. Or @powerboatr

2025 Explorer ST. Quick question. I was attempting to amber light Forscan change, and it wasn’t going well, so I changed everything back to where it was. I now have no fog lights, and I don’t think I changed anything related to them. I took a picture of the settings before I changed anything...

Yes, it’s called the Forscan spreadsheet. Just search whatever year car you have and Forscan spreadsheet, and it’ll pull it up for you.

Just wondering if there was a central location for all the info? THX!

Hi please guide me to this videos

He’s saying there are videos online showing how to do the PMI with Forscan.