Search results for query: forscan

Hi, I've been playing around with Forscan to try to enable AdvanceTrac Functions in my car since the European version does not allow ESC to be turned off, and advancetrac sport mode is not available. In Forscan under APIM and IPC modules there's an option to switch AdvanceTrac Control Function...

...that will depend on what brand tires as there are minor differences in OD among tire models even in the same size. If you wanted, i think you can even go into ForScan and adjust the tire size there to correct it, but i wouldn't sweat it. As you can see here, the difference is pretty...

5here have been people who have tried but I don't know if anyone has been successful with Forscan. In FDRS it's a toolbox routine under BCM

Can it be programmed with ForScan so that you don't have to involve the dealer at all?

Correct, good thing is you can reset it using FORSCAN, but not using the HPTuners ZFG OBDII device, weird. I bought the kit, just don't want to disconnect everything on the passenger side at the moment to install it.

Yes, if need be, that's the very battery I'm going with. Did you go with the Platinum? I needed at least 800 CCA but I believe the Platinum is 850.

Ended up installing a H7 today from Walmart. I had planed on a H8 but the size scared me. After installing the H7 im 99% sure the H8 would have fit. Reset my BMS and changed the battery to H7 in Forscan.

I have tried this several times on my 2026 Active model. I can't seem to get it to work for some reason however the automatic lock when walking away works. Our Active even being the base trim is fully loaded as we paid for the comfort package and the 200A equipment group.

...Back in the car, if you turn it on and shift to reverse, the camera does work. But you will be missing the lines on the screen. Booting up ForScan, you will have an error in the BCM. Navigate to service procedures and under BCM you will find “Local Interconnect Network New Module...

...of the DRL's while driving? As we all know, Canadian cars all have the DRL's on all the time with no option to turn off. There is no menu. Does anyone know if there is an option in ForScan to enable that menu again? I tried scanning through the various options but nothing jumped out at me

Digging it into this more, i have discovered that you can make the seating config change through ForScan to prevent the seatbelt warning from going off. (At least for '20-24) It's in the IPC. It's a drop down menu built into ForScan already so no need to look up lines of code. In the IPC...

...pulling the trim down and plugging it in, i'd like to know what required module programming and calibrations (if any) need to be done through ForScan. That way if i have to copy any as_built data from an existing module, i can do it now. I do not have the 360 camera option on my '23 due to...

You are likely only reading ECU codes with that programmer. It won’t scan the other modules for DTCs, as that’s where the error is likely stored. If i had to guess it's probably in the BCM module. Really need to scan with ForScan or a higher end scan tool that can read all module DTCs

...broken, so the sensor was basically hanging there and could move around slightly, causing the error. The dealer wanted some crazy $$ to repair it. I used forscan to disable the forward collision warning and problem is 'patched'. He said he doesn't care b/c he doesn't use the cruise control...

Does it say “input module is #) or something like that?

You have an extended license? If so, contact Forscan support with your VIN# and the error message. Your vehicle is not new so should be supported.

...owner had installed axel back mufflers but as far as i can see that was it. I'm am using the OBDlink EX wired cable to connect to my windows laptop. The Forscan Version is (v2.3.70). I wonder if i need to use the v2.4.22 version? From my research it seems like that supports newer MY vehicles?

https://fenfabrication.com/shop/explorer-st/p2c90fix/ This? U have a photo of this product

...fix but I'll be damned if the fix looks more complicated then my brain can handle at the moment. Installing the V2 bruised my ribs pretty bad, so I'm hesitant to install it, it's easy just to use FORSCAN to clear the code every now and then. Other than that I love the V2, and the noises it makes.

Can we get mirror reverse?