Search results

3 overlapped layers of 1.5 oz mat. I might call that good enough.

But note you have ST Line badging, not the ST emblems on the lift gate and grille.

And again…that’s called the ST Line…not just ST. This at its core is an ST group so posts about the ST Line would be helpful if clarified.

Considering the stock 10R60 has now gone into the 10’s I really don’t see why everyone thinks an upgrade is necessary anyway…it’s doing just fine and is living in tons of mid-11 second ST’s and now 10’s. Also considering the ST only comes with one engine and trans and this isn’t an ST Line group...

Well we have a 10R60 to start with. Although there has been some discussion as to what the actual differences are I haven’t seen anyone post what they may be.

Layer #1 is down. Gonna add 3 more over the next couple of days.

There seems to be some variation between all of them but Lethal for sure had their own parts made. No idea why my H&R’s measure 17” up front….mine are from the very first run of H&R’s so maybe they adjusted things over time?

Just posting pics of one side but the other matches. I moved the wiring harnesses on both sides for more space. Luckily there’s plenty of slack so I just moved them and zip tied as needed. Floor cleaned and CLD added. Wheel weights added for more mass. Dead is the name of this game…don’t want...

All H&R’s bind the middle of the rear coils.

Fully committed now.

The rear of mine absolutely sits lower than the average H&R but I’d like the front down a bit more. Was hoping the Lethals would sit lower then I could just swap the front coils and leave the back alone.

My H&R’s measure exactly 17” front and rear…but I have a couple hundred lbs of audio gear in the back so it’s lower than others I would assume.

Nothing has changed. ZFG is king of the hill.

While I’m working on brushed finishes I started on the FenFab coolant tank also.

https://www.lethalperformance.com/info/launch-controller

I think it’s a more well thought out product. Compare both and I think you’ll agree.

I like the TS Performance launch controller better…sold under Lethals brand.

Saw that…those measurements mean nothing to me. A proper measurement is from axle centerline to fender. Something as simple as an air pressure difference will make those posted numbers null and void. The fact that we have different wheels and tires definitely does.

I need to get a 1000 grit sanding pad to get the little scratches out but hopefully one day this Aviator console will be complete. Last part off-backorder date is moved to 11/30 so we’ll see. I also made a little ABS blank to fit in where the Aviators sunroof shade switch would be because I have...

I have more money in mods than I paid for the car new…I feel your pain.