Search results for query: forscan

thank you so much for making the account and letting me know I helped you out. If i just help 1 person then it’s all worth it for me to document and share. So glad i could help!

...it could be the speed sensor in the front diff so I spent $230 at my local ford dealer for the sensor and fluid. Luckily I held off and got forscan instead (which is great so I can still return the sensor and fluid). I came across your post and saw the part about irregular voltage, sure...

It seems like I have read, at least on the pre-2025, people could use forscan to modify the APIM and or ACM to remove the factory DSP settings, and make the output from the amp a traditional linear output (no roll off). I guess my question is, am I reading that right? Can you change a...

They are holding up good. I had to use forscan to change the time the power outlet stay on for after the car is shut off. They turn off after 30 seconds.when I did the install I bought 2 sets just so I can have extra parts if I had any failures.

...with the music and muddied the sound system. I'm hoping to disable the FENG/ANC purely to clean up the signal for the B&O speakers, rather than to change how the engine sounds. I’ll definitely check that '25 ForScan thread to see if anyone has cracked the code for the audio processing yet...

Any mods via FORSCAN have been hit or miss, you should check the '25 Forscan thread for posts regarding it. As for me I just slapped on CVFAB Downpipes & a Thermal R&D 3" exhaust and it became a moot issue...

So I ran through the non-forscan epb maintenance procedure a few times to try to release/reset it (and maybe shake things loose) and then drove it for a couple minutes. The rotor was the same temp as the other side and didn't appear to be dragging any longer, so maybe??? I got it fixed? I'll...

...3mm while the inner is 6 to 7. Grabbed the laptop and hooked it up, then tried to run the maintenance procedure to retract the epbs within forscan. Unfortunately, this failed midway through the procedure. I've got a couple codes related to that actuator now: c1034 and c2005. Anybody...

I've been digging through the spreadsheet looking for the right place to turn on my fog lights all the time. Thinking to turn them on with the DRL's, is the correct spot to do this?

It is not. You can enable Bambi mode with Forscan to keep the high, low and fog lights all on at once…that’s a pretty nice increase.

Anyone figure out why this is happening? Mine shows up the same, forscan is up todate. i have one of the recommended obd vlinker cables.

I bought mine from 4DTECH, well worth it. Super easy/quick to install.

It very well might be the OTS tune, I’d highly recommend a custom tune. If you think its the adaptive transmission learning tables, you can reset those with Forscan.

Not sure where Forscan issues get posted. We have 2 2025 explorer STs. I did the amber DRL change in Forscan. Changed the values according to the spreadsheet. Neither explorer has fog lights now. I even changed the values back to the factory setting, and still no fog lights. What the heck did...

Are you sure it threw the codes because of the broken MAP sensor replacement? Mine threw code when I drove in the rain, reset it with FORSCAN, then a couple of months later it threw a code when the temperature dropped significantly, FORSCAN reset again and all is well now. Check your T-Fitting...

...seem impossible for the ground to cause signal issues on the CAN bus that could interfere with the moon roof communication. If you can get forscan to log the AWD module voltage and the battery voltage in oscilloscope mode that should be the clearest definitive way to know is if those...

...stays on whatever style I selected, it won't change until I go in and change it. The auto stop/start can be permanently turned off thru forscan or by buying an add on module like https://www.autostopeliminator.com/products/2025-ford-explorer-autostop-eliminator?_pos=1&_fid=024e1a167&_ss=c I...

...remaining fuel mileage. Regardless, there is something disconnected between the stats. I had disabled Auto-Engine Off since 5K mi in Forscan. I’m at 67K mi. Other modifications were minimal (exhaust and catch can) and I’m on AT tires year round. Add 80% city driving, and my lead foot, there’s...

...the IPC dashboard indicator will not show up when pressing the fog switch and the foglight dosnt work. I activated all related functions in FORScan, but the indicator still doesn’t appear. Here is what I have already changed: BdyCM (regular config): Fog Lamp Switch = Enabled, Fog Lamp...

Which badge is this in the right picture? TIA