Recent content by StarWhite22

Nothing to it. Laid on my back and just took a bit to the lowest part. Poked thru and water came out right away.

Just drilled a hole in each of mine. 5/32. I was shocked at how much water came out. I’d venture at least 12 ounces out of each if not more.

Just had new front brakes done. Rotors and pads and assembly. Bad pitting and lip on the rotors was causing a loud clunking noise when applying the brakes at slow speeds. 2022 with 40,500 miles. Rear brakes are fine and have plenty of life. Upstate NY snow and salt hard on the brakes and car.

Ended up being the front brakes. Bad pitting and rust and a big lip on the rotors causing the backplate of the pad to be loose and have some play. Replaced the front brakes completely with new rotors and pads and assembly and the noise is gone. 2022 with 40,500 miles on it. Guess that’s upstate...

Ended up being front brakes. Rotors on the front were pitted and rusted bad and there was a large lip on the back side of one of the rotors causing the pad backing plate to have some play in it.

I have a similar noise and hear it when turning too but have also noticed it when applying the brakes at low speed. Do you notice it more when you hit the brakes? It’s definitely an audible noise. Dealer couldn’t find anything loose but I don’t know how hard they looked or what they looked at.

So I posted this on another thread but was seeing if anyone else has had this issue. It’s a little faint but definitely there when applying the brakes. That’s mainly when it occurs but only after you’ve been driving for awhile and the vehicle has warmed up and it only does it at slow speed like...

Yea it’s definitely not that as I don’t have that button on ours. We don’t have the front cameras. It’s just strange because it seems to only do it when it’s warm out or when you’ve been driving awhile and everything is warmed up. Doesn’t happen when braking from speed. Only when moving at slow...

Curious why most aftermarket exhausts don’t come with them? Seems like something that would make sense to do but I’m sure there’s a cost benefit analysis that wins out.

I am definitely getting a clicking or clunking sound when I apply the brakes. More noticeable when it is warmer out or when driving for awhile. Only happens at slower speeds but you can feel it in the steering wheel as well and in the brake pedal. Dealer couldn’t find anything but it had been...

My build date was February 2022. When it warms up I need to get under there and take a look at everything

It’s just a single bolt. I don’t think it has anything updated. We haven’t had any issues with it and bought it brand new and we’re at 38,000 miles now. Yea I may check with a dealer in Florida when we visit there.

So I took mine in the other day for the recall and all they did was inspect the bolt and said it didn’t need attention at this time. Not sure wtf that means but clearly they didn’t replace the bushing or the bolt.

Hell yea that’s awesome!! How are those tires? I’ve always heard good things about them. Looks sharp

Very smooth. No more road noise than the stock tires.