• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


H&R Springs & Bora Spacers Installed!

Messages
250
Reactions
121
Points
37
Location
Jacksonville, FL, USA
#81
The American in me said buy the Bora Spacers !!! :devilish: But the Canadian in me said sell the spacers and order rims instead. :cautious:
Im dual citizen haha born in Fla but entire family born & lives in Montreal. Take it from me, go get em!
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
260
Points
37
Location
Kaiserslautern, Germany
#82
I have them on now and was getting concerned after reading a few posts. Glad to hear all opinions. I think I will leave them on for now. My concern is that I drive the autobahn here in Germany and regularly travel at speeds of up to 125 mph. Higher sometimes. They seem completely fine and no vibration whatsoever.


Sent from my iPhone using Tapatalk
 

Cdubya

1000 Post Club
Messages
1,442
Reactions
699
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#83
The handling improvement is noticeable.
 

Cdubya

1000 Post Club
Messages
1,442
Reactions
699
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#85
Just curious - what size are you running front/back?
1.25" front, 1.5" rear. Stock 21" wheels, Steeda springs and sway bar. By handling improvement, I am talking the spacers alone.
 

Dgoebel57

Member
U.S. Air Force Veteran
Messages
130
Reactions
82
Points
27
Location
Faribault, MN, USA
#86
I did 1.25 all around and am very happy with the feel. Feels like it carves through turns better on the twisties.
I also did the H&R springs and Steeda bar.
 

NappyNick

New Member
Active Duty U.S. Navy
Messages
22
Reactions
10
Points
2
Location
AZ
#88
Still waiting for my springs. Ordered in March, ordered got canceled. Reordered with a July ship date now it’s September. I can’t win.
 

Messages
237
Reactions
94
Points
27
Location
Dallas, TX, USA
#89
Still waiting for my springs. Ordered in March, ordered got canceled. Reordered with a July ship date now it’s September. I can’t win.
im in that same boat. Ordered first week of April... crickets.
 

Messages
155
Reactions
173
Points
37
Location
Lake Wylie, SC, USA
#90
H&R's ordered June 1st. Still waiting, patiently. The 1.25" wheel spacers will be here tomorrow. Just wish the springs were here already too! :-(
 

NappyNick

New Member
Active Duty U.S. Navy
Messages
22
Reactions
10
Points
2
Location
AZ
#91
Finally got my spring in the mail and installed. Only took 6 months, but I finally have them. So far the ride is great. Should have been like this from Ford. Don’t have the wheel spaces yet. I’m still on the fence about them.
 

Attachments

Messages
290
Reactions
108
Points
37
Location
Bear, DE, USA
#92
Finally got my spring in the mail and installed. Only took 6 months, but I finally have them. So far the ride is great. Should have been like this from Ford. Don’t have the wheel spaces yet. I’m still on the fence about them.
Don't waste your time with spacers... they don't look right on STs without cutting studs. .75 front 1" rear.

people are going too aggressive and 1.25 is the minimum without cutting needed but they poke out too much. Car looks awesome as is!
 

Cdubya

1000 Post Club
Messages
1,442
Reactions
699
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#93
I have Bora F/R 1.25/1.5 and while i will admit i don't like the look of them poking out, i feel the handling improvement is definitely noticeable because of the wider track.
 

Messages
155
Reactions
173
Points
37
Location
Lake Wylie, SC, USA
#94
I have 1.25" BORA's at all 4 corners, along with H&R's. I guess I'm the "lame duck" here because, I absolutely love the look and have zero regrets!
 

Attachments

Messages
105
Reactions
142
Points
37
Location
CA
#95
I have 1.25" BORA's at all 4 corners, along with H&R's. I guess I'm the "lame duck" here because, I absolutely love the look and have zero regrets!
Not the only one. I love my 30mm spacers.

Sent from my SM-G991W using Tapatalk
 

KegsBdry

Active Member
Messages
926
Reactions
407
Points
182
Location
WashDC
#96
Finally had my H&R springs and 1.25" Bora spacers installed. I LOVE the look and feel of this setup. Great stance and better handling overall.

It just takes on a meaner more sinister look.

Also spray tinted the taillights and tinted side windows 15% View attachment 2337 View attachment 2338 View attachment 2339 View attachment 2340 View attachment 2341 View attachment 2342 View attachment 2343 View attachment 2345 View attachment 2346 View attachment 2347 View attachment 2348 View attachment 2349 View attachment 2350 View attachment 2351 View attachment 2352

Before & After pics attached.
This looks aggressive! Love it.

Do you have links to the H&R springs and 1.25" Bora spacers you ended up purchasing? Is there anything else I'll need to buy to make this work?

What's your new ground clearance?

Thanks for sharing. Just when I thought my ST looked mean enough, you go ahead and make it MEANER!
 

BigAnt75

Member
U.S. Marine Veteran
Messages
158
Reactions
117
Points
37
Location
Haslet, TX, USA
Vehicle
2022 Explorer ST
#97
Don’t you just have to adjust the rear camber .05 to make the rear flush with the body and the front. You shouldn’t need spacers to do this. Am I correct?
 

SmittysST

Member
Law Enforcement
Messages
108
Reactions
17
Points
17
Location
SOCAL
Vehicle
2023 FORD Explorer ST
#99
I would like to see 1" front and 1.25" rear. Seems like it would be the best overall set up to mach the flush look both up front and out back. I understand the front with the 1" will require a little trim on the factory stud, just curious if anyone has done it and has a picture or two?? Thx!!!
 

Messages
33
Reactions
10
Points
2
Location
Northern Indiana
Vehicle
2023 Explorer ST
I would like to see 1" front and 1.25" rear. Seems like it would be the best overall set up to mach the flush look both up front and out back. I understand the front with the 1" will require a little trim on the factory stud, just curious if anyone has done it and has a picture or two?? Thx!!!
I'm also curious about the 1" spacers. Did the studs actually have to be trimmed? I have pulled one of my wheels yet but don't most have cavities in that area that will line up with the factory stud?
 



Top