1/4" Wheel Spacers

[cwsosby]

I know this has been beat to death, but can't seem to find anyone who is certain in regards to my scenario. The plan is to put 1/4" BORA spacers on the front of my 25" ST with the stock wheels and studs. Can anyone confirm this will or won't work? Thanks

 

[UNBROKEN]

Yes it will work but why? 1/4” isn’t gonna make an appreciable difference.

 

[cwsosby]

Yes it will work but why? 1/4” isn’t gonna make an appreciable difference.

Thank you, I appreciate the response. My plan when the time comes is to swap over to a set of 295/40-21's on the factory rims. And that puts me just about where I wanna be up front.

 

[UNBROKEN]

Thank you, I appreciate the response. My plan when the time comes is to swap over to a set of 295/40-21's on the factory rims. And that puts me just about where I wanna be up front.

That still won’t be flush if that’s what you’re after.

 

[cwsosby]

That still won’t be flush if that’s what you’re after.

Correct. I am looking for a total of about 5/8 on the front when all is done and said.

 

[J-Dub]

Correct. I am looking for a total of about 5/8 on the front when all is done and said.

U need 15mm/20mm minimum. Anything smaller won't be strong enough for that truck !

 

[J-Dub]

Personally , I'd go 20mm in your scenario , and lowering springs of 1.5". But I'm certifiably insane , I think

 

[UNBROKEN]

Personally , I'd go 20mm in your scenario , and lowering springs of 1.5". But I'm certifiably insane , I think

6-8mm is max with a slip on spacer.

 

[2020FordRaptor]

I know this has been beat to death, but can't seem to find anyone who is certain in regards to my scenario. The plan is to put 1/4" BORA spacers on the front of my 25" ST with the stock wheels and studs. Can anyone confirm this will or won't work? Thanks

If your buying spacers might as well get the wheels flush with the fenders.