Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
Check engine light recently came on after i got car tuned and threw a P0151 O2 sensor circuit low. Was wondering has anyone had this issue and what they did to fix it. Have the cfv Downpipes.
Yeah everything should be hooked up properly had a performance shop do it but didn’t put the defoulers on and was unaware of this. Can you send me a link of what to get.
Correct, that extension between the sensor and the threaded bung in the downpipe is the defouler. I'm 99% sure they're only needed for the post-cat O2 sensors.
Disclaimer: I've never done this mod, just seen this issue come up enough here to know.
I took a better look at the description of P0151, sensor 1 is before the catalytic converter. This would not be caused by the whole defouler situation. How long ago did you have the downpipes installed? If it were recent I'd talk to the shop.
Yeah everything should be hooked up properly had a performance shop do it but didn’t put the defoulers on and was unaware of this. Can you send me a link of what to get.
I took a better look at the description of P0151, sensor 1 is before the catalytic converter. This would not be caused by the whole defouler situation. How long ago did you have the downpipes installed? If it were recent I'd talk to the shop.
I took a better look at the description of P0151, sensor 1 is before the catalytic converter. This would not be caused by the whole defouler situation. How long ago did you have the downpipes installed? If it were recent I'd talk to the shop.
I would think one of the Motorcraft up stream sensors, though I'm not sure the difference between the two part numbers. Sometimes one part number replaces another, sometimes one part number applies to certain years and the other to other years, or in this case it could just be Bank1 vs Bank2.
I have not replaced any 02 sensors yet so I'm not completely sure.