• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Wider tires?

ARC

Member
Law Enforcement
Messages
327
Reactions
106
Points
37
Location
Oak Lawn, IL, USA
Vehicle
2022 ST Black
#81
I have the 21in stock wheels and I went with 285 45 21. In addition I went with Bora hub centric 1.25in spacers. Looks great and flush with body panels. Been running this setup for 45k and never a problem.
 

Messages
8
Reactions
3
Points
2
Location
Nashville TN
Vehicle
2025 Ford Explorer ST
#82
Can you post a pic? Specifically of the fronts and how much poke you have, if any. I'm trying to get as close to flush as possible on the stock wheels. I can't tell from those other pics if the pockets in the back of the OEM wheels is deep enough to run the 1" without trimming the studs.
 

UNBROKEN

5000 Post Club
Messages
5,047
Reactions
6,051
Points
352
Location
Houston, TX, USA
#83
Can you post a pic? Specifically of the fronts and how much poke you have, if any. I'm trying to get as close to flush as possible on the stock wheels. I can't tell from those other pics if the pockets in the back of the OEM wheels is deep enough to run the 1" without trimming the studs.
If you want dead flush on oem 21’s, 295/40’s and rear camber set to -.5° with 1” spacers all around is perfect. If you’re not into cutting the studs use Eibach 30mm spacers…they’ll push the wheels out less than 5mm over a 1” spacer and still look great. 1.25’s are never the answer.
 

Messages
2,121
Reactions
983
Points
252
Location
Nevada
Vehicle
'20 Raptor, '22 Explorer ST, '14 GT500, '03 F150
#84
Can you post a pic? Specifically of the fronts and how much poke you have, if any. I'm trying to get as close to flush as possible on the stock wheels. I can't tell from those other pics if the pockets in the back of the OEM wheels is deep enough to run the 1" without trimming the studs.
1” is flush with the proper alignment. You NEED to trim the studs though.
 

UNBROKEN

5000 Post Club
Messages
5,047
Reactions
6,051
Points
352
Location
Houston, TX, USA
#85
1” is flush with the proper alignment. You NEED to trim the studs though.
There’s rumors the 2025 21” wheels have a deeper pocket than the earlier models. Hopefully someone will verify that as true because 1” is proper.
 

Messages
29
Reactions
21
Points
2
Location
Illinois
Vehicle
2025 Explorer ST
#86
There’s rumors the 2025 21” wheels have a deeper pocket than the earlier models. Hopefully someone will verify that as true because 1” is proper.
What is the depth on the 20-24 oem wheel's? I can verify the depth on my 25 oem's. I have been wanting to run 1" but really didn't want to trim the lug's.
 



Top