• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Full 3" exhaust?

Messages
92
Reactions
49
Points
17
Location
NJ
#1
So SPD's downpipes are 3", but all the exhausts that I am seeing are 2.25" or 2.5". Does anyone make a full 3" exhaust to mate with the 3" SPD downpipes?
 

LokiWolf

Active Member
Messages
580
Reactions
315
Points
182
Location
Henrico, VA
#2
So SPD's downpipes are 3", but all the exhausts that I am seeing are 2.25" or 2.5". Does anyone make a full 3" exhaust to mate with the 3" SPD downpipes?
Nope


Sent from my iPhone using Tapatalk Pro
 

OP
A
Messages
92
Reactions
49
Points
17
Location
NJ
Thread Starter #3
Awesome
 

Jwbreeding

Member
Active Duty U.S. Air Force
Messages
105
Reactions
42
Points
27
Location
Charleston, SC, USA
#4
Hopefully in the future there will be more options available.
 

Gymrat

New Member
Messages
20
Reactions
15
Points
2
Location
Harvey, LA, USA
#5
Larger exhaust = less back pressure; not always a good thing for performance.
 

OP
A
Messages
92
Reactions
49
Points
17
Location
NJ
Thread Starter #6
Larger exhaust = less back pressure; not always a good thing for performance.
For turbocharged vehicles it is.
 

Messages
28
Reactions
13
Points
2
Location
Baldwin Harbor, NY, USA
#7
You'll have more flow but less back pressure which can lead to turbo lag.
 

dolsen

Member
U.S. Marine Veteran
Messages
271
Reactions
157
Points
37
Location
Louisville, KY, USA
#8
You'll have more flow but less back pressure which can lead to turbo lag.
By no means am I an expert with turbo charged engines. I was always led to believe that with turbo charged engines back pressure was not a necessity. Can you elaborate just a little on that? I'm not doubting you, nor do I expect an in depth explanation, but I am curious and I want to be corrected if my "knowledge" is incorrect.
 

zdubyadubya

Active Member
Messages
813
Reactions
629
Points
232
Location
Utah
Vehicle
2020 ST
#9
OP
A
Messages
92
Reactions
49
Points
17
Location
NJ
Thread Starter #10
You'll have more flow but less back pressure which can lead to turbo lag.
Trust me, I have built a lot of turbocharged motor vehicles, from 1,000+awhp Nissan GTR's to 625rwhp turbo Suzuki Hayabusas. Larger diameter exhausts on turbocharged vehicles is always a better thing. Obviously you aren't gonna run a 4" exhaust on a busa for example, but a 3" full system on an ST will absolutely improve power.
 

zdubyadubya

Active Member
Messages
813
Reactions
629
Points
232
Location
Utah
Vehicle
2020 ST
#11
Just gonna put this here. Popped up in my youtube feed and thought it apropos.
 

Messages
156
Reactions
62
Points
27
Location
Houston, TX, USA
#12
Anyone know the setup Porsche uses on the Macan? Slightly bigger engine that sounds pretty damn good for a factory exhaust.
 

Sch0227

Member
U.S. Army Veteran
Messages
78
Reactions
34
Points
17
Location
Dallas, TX, USA
#13
Anyone considered the SPD Downpipes and electronic cut outs w/ the factory exhaust?

party on the streets, quiet in the garage..
 

zdubyadubya

Active Member
Messages
813
Reactions
629
Points
232
Location
Utah
Vehicle
2020 ST
#14
Anyone considered the SPD Downpipes and electronic cut outs w/ the factory exhaust?

party on the streets, quiet in the garage..
considered it, then gave up. by the time i priced out the valves, custom mandrel bent tubing, solenoids, wiring, etc. i was well over $1000.

That being said, a setup like this would be AMAZING and I hope someone does it.
 

zdubyadubya

Active Member
Messages
813
Reactions
629
Points
232
Location
Utah
Vehicle
2020 ST
#15
knew this vehicle existed, DIDN'T know it sounded like this. with the valves open, holy crap it's amazing...
 

SpeedOften

New Member
U.S. Navy Veteran
Messages
24
Reactions
14
Points
2
Location
Londonderry, NH, USA
#16
By no means am I an expert with turbo charged engines. I was always led to believe that with turbo charged engines back pressure was not a necessity. Can you elaborate just a little on that? I'm not doubting you, nor do I expect an in depth explanation, but I am curious and I want to be corrected if my "knowledge" is incorrect.
More backpressure leads to lag, less backpressure less lag.
 

Messages
64
Reactions
61
Points
17
Location
Mons, Belgium
#17
Hey folks, just wanted to throw an update on here. I’ve had a custom exhaust installed, finally. Thanks to COVID it’s taken longer than expected. It’s a cat-back, x-pipe, no resonator, into single-in, dual-out custom mufflers. 3” mandrel bent, welded all the way through. Tips are 3 1/2”.

It‘s perfect for me...not obnoxious, but is loud enough to turn heads and is pretty throaty. The only thing I may change are the tips. I’ll stick with 3 1/2, but might switch to something a little more refined. We will see. Here are some videos...not the best audio, so we’re working on improving it.

I also have the Palm Beach Dyno tune and a drop-in K&N air filter, along with H&R springs.
 

Attachments

Messages
294
Reactions
219
Points
37
Location
Grosse Pointe, MI, USA
#19
Hey folks, just wanted to throw an update on here. I’ve had a custom exhaust installed, finally. Thanks to COVID it’s taken longer than expected. It’s a cat-back, x-pipe, no resonator, into single-in, dual-out custom mufflers. 3” mandrel bent, welded all the way through. Tips are 3 1/2”.

It‘s perfect for me...not obnoxious, but is loud enough to turn heads and is pretty throaty. The only thing I may change are the tips. I’ll stick with 3 1/2, but might switch to something a little more refined. We will see. Here are some videos...not the best audio, so we’re working on improving it.

I also have the Palm Beach Dyno tune and a drop-in K&N air filter, along with H&R springs.
What are your thoughts on power gain? Anything you can notice? Very curious on low end power...any noticeable loss? See so much conflicting info on here and debating 3” vs 2.5” really only concern is potentially losing low end - I do more 0-60 messing around than 1/4 mile, high speed racing
 

Messages
153
Reactions
127
Points
37
Location
Los Angeles, CA, USA
#20
Hey folks, just wanted to throw an update on here. I’ve had a custom exhaust installed, finally. Thanks to COVID it’s taken longer than expected. It’s a cat-back, x-pipe, no resonator, into single-in, dual-out custom mufflers. 3” mandrel bent, welded all the way through. Tips are 3 1/2”.

It‘s perfect for me...not obnoxious, but is loud enough to turn heads and is pretty throaty. The only thing I may change are the tips. I’ll stick with 3 1/2, but might switch to something a little more refined. We will see. Here are some videos...not the best audio, so we’re working on improving it.

I also have the Palm Beach Dyno tune and a drop-in K&N air filter, along with H&R springs.
can you get pictures of the underside of your car? im having a hard time understanding what you mean by X PIPE single IN and double out....

sounds pretty good though. got a nice deep grunt to it.
 



Top