Front center storage cover

[NewTekBuzz]

Just picked up a 2022 Platinum. This center cover is scratched to crap. I don’t see where they sell just the cover so I bought the entire storage unit with cover from eBay. Has anyone replaced this? Looks like I may have to remove the entire storage unit? I don’t see where I can get to the side screws for just the cover.

 

[Eljaber]

An easier solution is to just buy the gloss black or carbon fiber center console covers you can find on Amazon.

 

[2020FordRaptor]

Just picked up a 2022 Platinum. This center cover is scratched to crap. I don’t see where they sell just the cover so I bought the entire storage unit with cover from eBay. Has anyone replaced this? Looks like I may have to remove the entire storage unit? I don’t see where I can get to the side screws for just the cover.

Could have just bought a cover.

 

[NewTekBuzz]

An easier solution is to just buy the gloss black or carbon fiber center console covers you can find on Amazon.

Yeah but doesn’t fit the platinum trim. I did look into this

 

[NewTekBuzz]

Could have just bought a cover.

Can you provide a link, thanks

 

[2020FordRaptor]

Yeah but doesn’t fit the platinum trim. I did look into this

Yes it does, there’s no difference there.

Can you provide a link, thanks

https://www.google.com/aclk?sa=L&ai...pMmNluOMAxV7GEQIHbD3LugQwg8oAHoECAMQDQ&adurl=

 

[NewTekBuzz]

Yes it does, there’s no difference there.

https://www.google.com/aclk?sa=L&ai...pMmNluOMAxV7GEQIHbD3LugQwg8oAHoECAMQDQ&adurl=

my point was you cannot buy just the OEM cover. and doesn't match the platinum wood grain. id rather buy the OEM and have it be correct. Thanks though

 

[UNBROKEN]

Throw a sticky pad on it…covers the scratches and makes it useful.

 

[2020FordRaptor]

my point was you cannot buy just the OEM cover. and doesn't match the platinum wood grain. id rather buy the OEM and have it be correct. Thanks though

Well that grey doesn’t match the wood grain and it’ll scratch again.

 

[NewTekBuzz]

Part arrived today. It took me about 1 1/2 hours. What a project. I had to loosen the entire center console
and slide it back. Then the top half of the center console would pop off. Once all the wires are disconnected, I was able to work on it outside of the car.there are 4 screws holding the entire assembly on from underneath. Transferring the cigarette lighter was the trickiest part! Lol. I could do it again in half the time. There were a lot of “WTF’s” and “please don’t break” haha

 

[NewTekBuzz]

Well that grey doesn’t match the wood grain and it’ll scratch again.

lol, thanks for your help!

 

[Mikes 22St]

I didn't have scratches but everything under put on top of that WILL slide off and u will get tired of picking stuff off the floor while u try to drive ! I just bought what UNBROKEN said . It's black but sure u could find other colors ,I bought it on Amazon and got 2 for some insanely low price, may have been Temu too . But when u find out the price of a new door just remember the pads are about $10....