Unsightly Harness relocation options

[Ifixraptors]

Has anybody come up with a creative solution to relocate these harnesses so that they don't stick out like a sore thumb? Sure, I guess one could just unclip them and stick them out of sight but that's not what I'm asking for here. Looks for the best options...GO

 

[UNBROKEN]

Mine didn’t have that tab for the harness to snap into, it just used a hole in the core support. I made a new hold somewhere underneath and tucked it out of the way.

 

[Combatvet]

Mine didn’t have that tab for the harness to snap into, it just used a hole in the core support. I made a new hold somewhere underneath and tucked it out of the way. View attachment 32757

Which strut tower brace is that, I dig it! And which cover is that? Thanks!!!

 

[UNBROKEN]

Which strut tower brace is that, I dig it! And which cover is that? Thanks!!!

I found the bar online and built the mounts myself. I also made the ecm cover.

 

[Combatvet]

I found the bar online and built the mounts myself. I also made the ecm cover.

That's the best looking cover I've seen to date. Damn, wanna sell it?

 

[KANSAS]

The connector on the left side serves no purpose and could be removed. Might be a factory test connector.

Unknown connector on fender. | Explorer ST Forum

 

[-REDRUM-]

I unclipped the drivers side plug and pushed it back in to the fender hole. The harness I pushed down under the radiator support so it isn't seen. I also made a cover that runs along the main portion of the radiator cover to make all of the wiring out of sight. At work but can send a pic later...