FS 2022 ST Part Out

[Tb330]

Traded in the ST earlier this week so everything is up for grabs so I can get the cars back in the garage. Willing to ship everything except the wheels and everything is located in Corning, NY. For the locals, I’ll be in Rochester, NY on 9/27 and 9/28 so I could meet you to save some travel/shxpense)

S&B Intake: $325
FenFab Hotside Charge Piping: $400
FenFab Charge Pipe without blowoff (see picture, one side has a small dent where the clamp goes): $150
FenFab ECU Cover (will include original and black screws, the backing plate is the bare metal version that’s wrapped in gloss red vinyl - this was one of the first of these setups and is featured on the FenFab site for the backing plate): $50
FenFab Coolant Resivoir: $180
J&L Catch Can: $120
Steeda Rear Sway Bar (really needs to be repowdercoated, the blue was in rough shape so spray painted it red anticipating to get it refinished at some point, just never got there): $150
Steeda Rear Vertical Link Reinforcement: $75
FenFab Subframe Lockout: $225
Bora 1.0” and 1.25” wheels spacers: $225
P3 Gauge (blue) mounted in a new vent, includes FenFab ethanol sensor kit as well as the sensor: $500
GT350 Brake Kit (includes everything you need to bolt these on - brackets, calipers and hardware, rotors, 2 sets of pads (Hawks were too dusty so I swapped them to the Powerstops. These are heavy so may be a bit more expensive to ship): $1,600
AFR Subframe Brace: $150
3D Front and Cargo All weather Mats: $100
Velgen VF5 with Lionhart LH5 tires (one wheel was repaired and still has a small chunk out of the tire - see pics): $2,200
Painted Emblems (few small marks in the front one and one of the tabs on the rear broke, but shouldn’t cause issues if you tape it back on like the factory one was): $175
JXB insert and Bolt: $85
Oil filter housing with new filter: $40
O2 sensor: $40
Eibach Springs: $225
Redline Hood Strut Kit: $60
Whoosh Downpipes with Prosport Gauges Large 90* Minicats (had an occasional CEL with just the spacers and these minicats solved it. Also cut off the front support rods which significantly cut down on the cold start vibration): $350
Speed logic CF Strut Bar: $300
Ronin Oil Cap: $40


View attachment IMG_5323.jpeg
View attachment IMG_5325.jpeg
View attachment IMG_5396.jpeg


View attachment IMG_5280.jpeg
View attachment IMG_5328.jpeg
View attachment IMG_5329.jpeg

View attachment IMG_5333.jpeg
View attachment IMG_5334.jpeg
View attachment IMG_5336.jpeg
View attachment IMG_5337.jpeg

View attachment IMG_5341.jpeg
View attachment IMG_5342.jpeg
View attachment IMG_5365.jpeg
View attachment IMG_5372.jpeg
View attachment IMG_5374.jpeg
View attachment IMG_5375.jpeg
View attachment IMG_5376.jpeg
View attachment IMG_5377.jpeg

View attachment IMG_5380.jpeg
View attachment IMG_5381.jpeg
View attachment IMG_5382.jpeg
View attachment IMG_5284.jpeg
View attachment IMG_5384.jpeg
View attachment IMG_5385.jpeg
View attachment IMG_5387.jpeg
View attachment IMG_5388.jpeg
View attachment IMG_5389.jpeg
View attachment IMG_5390.jpeg
View attachment IMG_5391.jpeg
View attachment IMG_5392.jpeg
View attachment IMG_5393.jpeg
View attachment IMG_5395.jpeg
View attachment IMG_5394.jpeg

 

[Gyp_Explorer st]

Messaged you


Sent from my iPhone using Tapatalk

 

[Leadfoot]

Messaged you about the P3 and hood struts.

 

[BrooseDaMoose]

Sent you a message about the ECU cover.

 

[Grey25ST]

How many miles on the intake?

 

[BuckStrickland]

Interested in the hood struts and Catch Can if they're not gone...

 

[Wendell1167]

Interested in ecu cover and possibly intake.

 

[Tb330]

Hi all, busy day. Everything is pending or sold with the exception of the coldside charge pipes, wheels, o2 sensor, oil filter housing, downpipes, and the front all weather mats.

Will have a Mishimoto Intercooler available soon as well, but waiting on a replacement support rods before I list it.

 

[Ghost91w]

Messaged you about intercooler.