Search results for query: forscan

Correct, good thing is you can reset it using FORSCAN, but not using the HPTuners ZFG OBDII device, weird. I bought the kit, just don't want to disconnect everything on the passenger side at the moment to install it.

Yes, if need be, that's the very battery I'm going with. Did you go with the Platinum? I needed at least 800 CCA but I believe the Platinum is 850.

Ended up installing a H7 today from Walmart. I had planed on a H8 but the size scared me. After installing the H7 im 99% sure the H8 would have fit. Reset my BMS and changed the battery to H7 in Forscan.

...and I decided to upgrade the air intake, and intercooler. I purchased a S&B air intake along with their intercooler with down pipes. Installation took about 5 hours. Now we have the code PO238 Turbocharger/Supercharger Boost Sensor "A" circuit High. Tried removing with FORScan program. Any...

I have tried this several times on my 2026 Active model. I can't seem to get it to work for some reason however the automatic lock when walking away works. Our Active even being the base trim is fully loaded as we paid for the comfort package and the 200A equipment group.

...Back in the car, if you turn it on and shift to reverse, the camera does work. But you will be missing the lines on the screen. Booting up ForScan, you will have an error in the BCM. Navigate to service procedures and under BCM you will find “Local Interconnect Network New Module...

...of the DRL's while driving? As we all know, Canadian cars all have the DRL's on all the time with no option to turn off. There is no menu. Does anyone know if there is an option in ForScan to enable that menu again? I tried scanning through the various options but nothing jumped out at me

Digging it into this more, i have discovered that you can make the seating config change through ForScan to prevent the seatbelt warning from going off. (At least for '20-24) It's in the IPC. It's a drop down menu built into ForScan already so no need to look up lines of code. In the IPC...

...pulling the trim down and plugging it in, i'd like to know what required module programming and calibrations (if any) need to be done through ForScan. That way if i have to copy any as_built data from an existing module, i can do it now. I do not have the 360 camera option on my '23 due to...

You are likely only reading ECU codes with that programmer. It won’t scan the other modules for DTCs, as that’s where the error is likely stored. If i had to guess it's probably in the BCM module. Really need to scan with ForScan or a higher end scan tool that can read all module DTCs

...broken, so the sensor was basically hanging there and could move around slightly, causing the error. The dealer wanted some crazy $$ to repair it. I used forscan to disable the forward collision warning and problem is 'patched'. He said he doesn't care b/c he doesn't use the cruise control...

Does it say “input module is #) or something like that?

You have an extended license? If so, contact Forscan support with your VIN# and the error message. Your vehicle is not new so should be supported.

...owner had installed axel back mufflers but as far as i can see that was it. I'm am using the OBDlink EX wired cable to connect to my windows laptop. The Forscan Version is (v2.3.70). I wonder if i need to use the v2.4.22 version? From my research it seems like that supports newer MY vehicles?

https://fenfabrication.com/shop/explorer-st/p2c90fix/ This? U have a photo of this product

...fix but I'll be damned if the fix looks more complicated then my brain can handle at the moment. Installing the V2 bruised my ribs pretty bad, so I'm hesitant to install it, it's easy just to use FORSCAN to clear the code every now and then. Other than that I love the V2, and the noises it makes.

Can we get mirror reverse?

Welcome Aboard!! You came to the right place to learn about anything and everything EXPLORER. Also, you will notice a large number of Military Veterans and LEO's in our midst. Double Welcome Aboard!!

...Gray with beige leather interior. Perfectly matches my wife's 2020 Escape Titanium Hybrid. 28K miles and clean carfax. Have had no issues so far other than a tire pressure sending unit failed. But at 5 years old I expected it and replaced them all. Hoping to make some lighting changes with...

...subwoofer signal in the rear. I've played with all of the settings on both the LOC and amp....this delay issue doesn't improve. I fired up Forscan last night to look at my EQ settings. To my surprise, my EQ was already set to 0. My question: There are 12 other EQ settings (1-9, A, B, C). Is...