Search results

Pull the hose off the intake tube and cap it with a rubber cap. Most use a 1” chair leg cap from the hardware store.

They do not. They sell piping that mimics the 2020 oem stuff that used a bypass valve…that’s what the flange is for on their kit. If you have an early car you can run a Turbosmart valve but that’s it. I haven’t seen it but I assume they include a block off plate for later models that don’t come...

Brett will coat them whatever color ya want…and his weld quality is a selling point. It’s also why I left mine uncoated. Then there’s also the ability to run a BOV that afe doesn’t offer.

www.fenfabrication.com

I’m telling yall…FenFab is where it’s at.

If you think you have a little air trapped in there just get it up to speed…I prefer triple digits…then absolutely slam on the brakes. Drive it into the ABS pump kicking in…it’ll cycle the air out of the pump. As long as you don’t let the master cylinder go dry though it won’t be a problem.

I run the High Performance ST group…I see this shit every day. lol

Lowering the subframe is a normal part of downpipe installs and trans swaps so yea…it’s highly likely the shop screwed it up but no, it wasn’t to make you come back for more service. Typical shop crap when they run fasteners in with an impact to save time…occasionally something gets stripped out.

I ran a performance shop and have had my hands on literally thousands of aftermarket mufflers and cat-back systems. Never once seen one with a weep hole in it…and certainly not on the “wrong side” from a manufacturer. I’m sure there’s an outlier out there somewhere…but it’s rare enough to say...

Aftermarket mufflers don’t always have weep holes.

As opposed to every joint in the oem exhaust leaking condensation?

Covered in post #7. It’s not rocket science…small hole in the lowest point is all you need.

Yea you need to stop believing everything you read and enjoy your car.

Not sure where you get those stats but I can assure you there’s countless forced induction vehicles well north of 100K and still going strong. In Europe that’s considered a new car still. There’s plenty of ST’s over 100k also and mine isn’t far behind at 94K and it’s been heavily modded its...

You’re welcome. lol

Not entirely true but if that’s your thoughts enjoy the drop in.

That’s not an issue…that’s the car doing the things it does normally.

The PIU brace isn’t just a straight drop in for our cars though. Some modifications are needed around the 2nd row seats for all the carpet and trim panels to fit.

If you ever thought about swapping to black emblems there’s also an oem black set of ovals…I think they’re from a Timberline.

Nothing under the hood is cleared on any of them.