• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Explorer ST reducing the 60ft

S

singingwhodat

Member
#1
Messages
252
Reactions
112
Points
37
Location
New Orleans
#1
Hi everyone, I’m looking for suggestions on how to reduce the 60ft when launching my 2021 ST. I raced high powered Mustangs for a few years and understood what needed to be done to get them to hook and pull 1.4 and 1.5s 60fts. Stickier tires, aftermarket suspension parts, torque converters with a higher stall, and actually being able to heat the tires, etc.

I made quite a few pulls using Dragy and I was hoping for better. I am running the ZFG 93 Tune and running a 13.27 1/4 and a 2.05 60 foot. I love the tune so it’s probably just me and suck at launching the AWD ST.

Please share your experience with launching your ST and what you did personally to get below 2.0. Suspension, tires, etc. I would greatly appreciate any insight you may be able to share. Thanks in advance


Sent from my iPhone using Tapatalk Pro
 

Last edited:
UNBROKEN

UNBROKEN

4000 Post Club
#2
Messages
4,249
Reactions
4,958
Points
352
Location
Houston, TX, USA
#2
Shove the brake pedal to the floor…hard. Bring the RPM up to 2800ish and let it eat. They can 1.7x 60’ pretty easily.
 

B

bluesnake01

Member
#3
Messages
316
Reactions
149
Points
37
Location
Socal
#3
UNBROKEN said:
Shove the brake pedal to the floor…hard. Bring the RPM up to 2800ish and let it eat. They can 1.7x 60’ pretty easily.
Click to expand...
Crazy! Most ive done is 2k, even then, it feels like the SUV wants to take off.

Is it even needed to remove the traction control? I mean dont think ive ever seen one nor myself's, heard it lose traction on a stock ST.
 

I Bleed Ford Blue

I Bleed Ford Blue

Active Member
U.S. Navy Veteran
#4
Messages
645
Reactions
428
Points
182
Location
Ohio
Vehicle
23 Rapid Red Explorer ST
#4
You need to load up the convertor and get it up on boost when you launch. That will make a big difference in your 60' and 1/4 mile times.

Just mashing the throttle, you are initially launching with no boost and the puny 3.0 has maybe 250 hp and 225 tq w/o boost.
 

OP
S

singingwhodat

Member
Thread Starter #5
Messages
252
Reactions
112
Points
37
Location
New Orleans
Thread Starter #5
UNBROKEN said:
Shove the brake pedal to the floor…hard. Bring the RPM up to 2800ish and let it eat. They can 1.7x 60’ pretty easily.
Click to expand...
That would explain one of my mistakes. I have been leaving at 2k


Sent from my iPhone using Tapatalk Pro
 

OP
S

singingwhodat

Member
Thread Starter #6
Messages
252
Reactions
112
Points
37
Location
New Orleans
Thread Starter #6
I Bleed Ford Blue said:
You need to load up the convertor and get it up on boost when you launch. That will make a big difference in your 60' and 1/4 mile times.

Just mashing the throttle, you are initially launching with no boost and the puny 3.0 has maybe 250 hp and 225 tq w/o boost.
Click to expand...
I guess I have been scared of the missing bolt in the subframe of my 2021 I’ll make some better launches and report back


Sent from my iPhone using Tapatalk Pro
 

S

st8

1000 Post Club
#7
Messages
1,064
Reactions
467
Points
212
Location
Bel Air, MD, USA
#7
singingwhodat said:
I guess I have been scared of the missing bolt in the subframe of my 2021 I’ll make some better launches and report back


Sent from my iPhone using Tapatalk Pro
Click to expand...
Lol yeah I’ve been afraid to go higher. I’m completely stock but curious to see what a proper boosted launch feels like.
 

R

ridered74

Member
#8
Messages
184
Reactions
116
Points
37
Location
Columbus, OH, USA
#8
Sport mode on, traction control off. You should be able to get mid to low 12's pretty easily.
 

B

bluesnake01

Member
#9
Messages
316
Reactions
149
Points
37
Location
Socal
#9
singingwhodat said:
I guess I have been scared of the missing bolt in the subframe of my 2021 I’ll make some better launches and report back


Sent from my iPhone using Tapatalk Pro
Click to expand...
What was your trap speed in those runs?
 

B

bluesnake01

Member
#12
Messages
316
Reactions
149
Points
37
Location
Socal
#12
Exactly what @Exploderst those traps look to be from a stock ST. Your 1/4 mile times as well are not too far off from a stock ST either.
 

OP
S

singingwhodat

Member
Thread Starter #13
Messages
252
Reactions
112
Points
37
Location
New Orleans
Thread Starter #13
bluesnake01 said:
Exactly what @Exploderst those traps look to be from a stock ST. Your 1/4 mile times as well are not too far off from a stock ST either.
Click to expand...
Definitely tuned by ZFG


Sent from my iPhone using Tapatalk Pro
 

OP
S

singingwhodat

Member
Thread Starter #15
Messages
252
Reactions
112
Points
37
Location
New Orleans
Thread Starter #15
Made one pull a few minutes ago and it was a lot better. I turned off traction control but not advanced traction. The shift from 1st to 2nd was brutal. Going to do some data logging and send it to Adam. Should I have launched like that when I sent him the original data logs?




Sent from my iPhone using Tapatalk Pro
 

D

DetroitST

Member
#16
Messages
178
Reactions
93
Points
27
Location
30122 Woodward Ave
#16
I dont turn off anything, just peg to 2500ish and drop.

That being said, if you want a smoke show, hold TC for 5 seconds and all Ford's gizmos go for a smoke break.
 

D

DetroitST

Member
#17
Messages
178
Reactions
93
Points
27
Location
30122 Woodward Ave
#17
You can see around 1200M I hit the brakes. On crappy Detroit roads, spun until 3rd gear. Easily these are 1.7x cars on any NHRA strip. Honestly, I want to start a 60-100 thread. If we can see compare those acceleration times, I think those are more opportunistic for the daily driver. Screenshot_20220227-161559_dragy.jpg
 

You must log in or register to reply here.

Explorer ST Posts



Top