Recent content by DSGR

What's your thoughts on the amount of oil?

Thanks!

Nope. I reviewed an installation video of this part in an earlier model ST and it fits fine. Mine is a 2026. I was born at night, but not last night.

I've not seen anything under the hood on a 2025 or older. We have a 2026 and it doesn't fit. The charge pipe is too long. The FenFab charge pipe replaces #12. When I was doing a test fit, it was putting a lot of pressure on #16. In fact, so much pressure, if I loosened the clamp at the air...

We bought a 2026 ST. I thought I'd install a UPR catch can, the FeFab charge pipe, and the FenFab ECM backing plate/cover. The charge pipe doesn't fit; it's too long by about an inch. It could also be 1" less in diameter, but because it was too long as well, it put a lot of pressure on the tube...

93 octane.

I installed one in our '26 ST. It works perfectly! And, yes, it was a pain to get unplugged. The video is terribly misleading!

I finally did a test fit on the Ford Explorer ST OEM Charge Pipe. It was about 1" too long and the diameter in the largest part of the pipe is too wide. It puts a lot of pressure on the pipe behind it from the turbo and it pushes the small end off the inlet tube on the driver's side beside the...

Looks great! Any NVH?

Yep, I looked at a lot of the info about the AWR and I wasn't sold on it...like you said, it mostly protected the right side. Defeats the purpose!

:ROFLMAO: I bet it felt somewhat different, though! Have you noticed any NVH?

I ended up using stainless steel lock and flat nuts and two stainless steel hex nuts They worked and it's tight!

They look great!! Would you post the part number? On the Wesdon website, application is by size. Thanks!

I asked UPR and FenFab did they know of any specific changes in the 2026s and they said they weren’t aware of any. One other thing I noticed was the hole used to mount the cc in my instructions was different than many of the photos and videos I reviewed. In those, facing the front of the...

I have not the opportunity to post our 2026 Space White Explorer ST. The outside is strictly stock. I have competed some installations under the hood, though. This is how it went; it's a long read. After reviewing a few sites, information presented in the forum, and from my own experience with...