Recent content by dc332

Update: I found the torque specs here https://ford-specs.com/cars/2020/explorer3.0/torque-specs_engine.php 35 ft-lbs

Does anyone know what the torque specs for the downpipe e-torx nuts? Also, does anyone have the torque specs for the front subframe bolts (specifically the one's loosened to install said downpipes). Thanks!

If you have the back window sunblocker screens, check that. That's what happened with mine. I just keep them up so they don't make noise.

Nice! I have a gauge where I can clear DTCs easily so this would be a non-issue if I tried to start the vehicle with the switch off.

I agree. They could just tow it if they really wanted to. Just looking at a cheap option to delay a potential thief. I wasn't sure if putting in a fuel pump relay interrupt switch would mess with the pcm.

Was thinking of doing a kill switch on my fuel relay? Has anyone done this or have a write up? Any adverse issues with the computer?

That's a smart workaround, using the memory seat 3 for that. I'll keep that in mind in case this change reverses itself.

Thanks, I will try this.

I reversed all my changes. One of the other changes was the reverse mirror tilt. After switching everything back to stock, I go to my mirror settings and now the option to use reverse mirror tilt exists in the setting menu. I set it up and it works well.

Hey all, I made a few minor changes to the ST today (fog lights on with high beams), write the change in, cycle the ignition. However, the changes aren't showing up on the vehicle. I went back into FORScan, and the changes are enabled. Any idea where the breakdown has occurred?

The handling is definitely improved, I'll agree with that.

With Steeda sway bar, the ride was a little harsher than I prefer. Also I was getting some interior rattles with the inserts + sway bar. I solved the rattles so I'm 50/50 on trying the inserts out again.

Good catch, I lowered the price. I got them from Lethal Performance for $279.

Sold!

Yeah, the rivets were annoying for me as well. I managed to do it without getting rid of the rivets and just kind of shoving everything back into place. As for the not having the rivets.. maybe throw in a bolt or two to hold it together?