Eibach 30mm spacers

[jwalkerftw]

Anyone running Eibach 30mm spacers? If so did anyone have an issue with not having enough space with their wheels cut-outs around the hub? Are all cut outs the same on all ST OEM wheels and deep enough to fit the 30mm Eibach spacers without having to trim?

 

[Combatvet]

I believe they still need to be trimmed.

 

[UNBROKEN]

I believe they still need to be trimmed.

Not true.

 

[UNBROKEN]

The 30mm spacers work fine with no trimming…that’s the whole reason to get them.

 

[Combatvet]

The 30mm spacers work fine with no trimming…that’s the whole reason to get them.

Good to know I'm not always right.

 

[jwalkerftw]

The 30mm spacers work fine with no trimming…that’s the whole reason to get them.

I've heard some saying to get 30mm Eibach spacers front and rear with rear camber set to -.5° if you want near flush and no stud trimming. Is that true? Also if the rear would to be set to -5 degrees, would the tires wear down unevenly?

 

[cheetoduster]

I've heard some saying to get 30mm Eibach spacers front and rear with rear camber set to -.5° if you want near flush and no stud trimming. Is that true? Also if the rear would to be set to -5 degrees, would the tires wear down unevenly?

https://www.explorerst.org/threads/lowered-cars-w-spacers-and-adding-5-deg-to-rear.9358/
Edit: it's related to lowering, not necessarily spacers.

 

[2020FordRaptor]

I've heard some saying to get 30mm Eibach spacers front and rear with rear camber set to -.5° if you want near flush and no stud trimming. Is that true? Also if the rear would to be set to -5 degrees, would the tires wear down unevenly?

No uneven wear and 30mm spacers with that camber will poke a little, but very close to flush.