Search results

All of mine started going. First it was just a blank for one pressure reading. Had just the one replaced. A week later, get TPMS system fault code B1182 and all pressure readings blank. Manually trying to relearn failed with another wheel TPMS sensor not responding. Replaced that one...

Using vacuum extraction, you really should be able to get most of the oil out. I always try to change the extraction tube positioning a few times after it starts pulling air. I have always added 6qts to get it to full and then another 1/4 qt to get it a smidge past.

Who's on first??? To be clear, I mean that RusW1 had a saggy rear end after installing the Steeda springs (No spacer).

But he's saying the rear sagged...

The rear Steeda springs should not sit noticeably lower than the front! The wheel gap should be higher and definitely you should not need spacers. I believe they sent you the wrong springs or they produced a batch incorrectly. Did your come labelled? Who knows, with all the talk of spacers...

Easiest way is to copy the entire contents of the thumbstick to your laptop. But the original files are in a folder /files/other/backup

Beta4 is the current one. Do NOT use alpha5. The important things are make sure you are on Sync 3.4 23188 and then after the fullscreen mod, save the backup files on the thumbdrive.

Not talking "made in". I mean it is sourced from there and not evsn sold here in proper outlets.

Mine makes the same noise. Normal.

Failure rate is probably 20% now... that is, it won't be the mode I left it in when I start the car. There is also the potential that it can do harm since this is an unknown device from China. You have to accept the risk and imperfect performance. If I were to do it again, I probably would...

After testing some 8 or 9 Carplay wireless dongles and wired over the past 2 weeks, it is clear to me that some are faster than others. Interestingly, some dongles are faster and less laggy than wired Carplay with my iPhone 14ProMax. My favorite is still Expinsig dongle but unfortunately it...

yes. but if they match your rims, it should be a non-issue.

If the AWD module issue is intermittent and you get the codes for it, you should at least try the grounding mode listed in the TSB. Dealers don't seem to want to do it and push for a new AWD module--whether covered under warranty or not. It's probably just easier for them. I don't think it's...

I just replaced one with one with the metal collar (similar to the one pictured). It is much more noticeable in the black stock wheel. If I were to do it again, I'd one that is just a black rubber stem.

You should run a scan to see what codes come up. A lot of different faults have the same dash warnings.

No, not possible.

Am trying an Expinsig Carplay/AA wireless dongle (link not given because product "unavailable" on Amazon). To my surprise, it is noticeably less laggy than my other CP-only dongles. Also does not crash. Bottomline, if your older carplay dongle is laggy, you might want to try something else...

some button presses seem to take a second... some 3-4 seconds before I see action.

Which dongle? My Mavlou crashes often. That was previously my fave. Then tried Carplaykits CP1. crashes but not nearly as often. Ihave 3 more dongles to try this weekend...

You saying it'll last you a full year??