Search results

I did a forscan change to 726-43-01, instead of x1x1 set it to x4x4, this was for testing only. This gives you full time ambers as DRL, position and turn. Only issue that I noted before changing it back was: 1. With any setting other than DRL you will not have functional turn signals on the...

They only turn on once you take it out of park.

https://www.explorerst.org/threads/2025-st-test-mules-for-forascn-changes.7838/post-102013 You can look there for your answers, but not sure what you mean by parked?

The fake engine noise coming from the dash area appears to be off, I can only hear the exhaust from the rear (Thermal 3"). I have not noticed any more cabin noise or any outside noise than I did before when I am cruising. So to me the FENG seems to be off and the ANC is still on. I can always...

I will try out some testing this weekend, here are some things I have tried with varied success while rooting around in the spreadsheets. I posted this in another thread, but figured it would be better here since its for a 25. Only change would be 726-43-01 keep it as x1x1. Although the Ambers...

I have driven close to 2000 highway miles after the bumper removal, with most of it using Blue Cruise, and have seen no issues so far. It tracks straight and all functionality has been spot on.

I didn't reprogram anything, only got a CEL for removing the shutters. That was my mistake, but at this point I no longer plan on taking the front end apart again. Just gonna wait it out for tuning. I installed the FenFab subframe lockout kit recently, still working out when I want to do the...

I noticed a change. I have no way of proving it's off, but my "calibrated ears" don't hear the engine noise from the front anymore, just the exhaust sound from the back

Here are some things I have been messing with. Confirmed a couple, and others were a lost cause that I could not figure out even after hours of pouring through the spreadsheet. I know there are people smarter than me when it comes to this. Hope it helps.

Steeda changed the hardware for the brace, just got mine in today. Looks like the frame studs are now bolts.

Mine is a 9/24 Build 727-01-02 0000 9204 00C7 783-01-01 5801 00E5 Changed only 727-01-02 to 0000 9404 00C7 as well. Gonna drive it for a couple days and see, but mine has a Thermal 3" on it and it basically has the same sound so it covers the old fake noise.

I will try it this afternoon when I get off work. I have also been looking through both spreadsheets and validating previous changes from the 20-24 Explorers and getting the correct values for the 25s. Should there be a separate post for us 25+ guys or just keep it within the original forscan...

I plan on taking it apart again in the future to add a better mounting bracket for the big mouth. So I will take a look and see what's going on.

That is what I did, just the shutters removed. Slide bracket and motors are still installed/connected. I followed the same process as my F150. That requires the entire shutter assembly to be removed and cut out, then you relocate the motors but keep them plugged in. Other than having to take...

Thanks everyone for the welcome. So first mistake on the Explorer so far, removed the shutters after installing the intercooler (same process I did when I installed my COBB intercooler on my truck) now the CEL is stuck on for "Active Grille Shutter "A" Position". Doesn't bother me as I know...

Picked up a 25 ST a little over a month ago. Not my first Ford so I already had an idea of what I wanted to add going in. My other Ford is 2019 F150 XLT Sport (3.5 Ecoboost) that I Raptor swapped and now in the process of long travel and links. Lots of mods on that thing. It's the one with the...