• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


22” Wheels??

Flyspur32

New Member
Messages
2
Reactions
1
Points
1
Location
Carlsbad, CA, USA
#21
Ok thanx for the help. one more dumb question..a 9.5” wide rim runs a 295/35 tire?
 

Messages
45
Reactions
9
Points
2
Location
Cincinnati, OH, USA
#23
Start with picking a wheel width...then you can figure offset from there for how you want the wheel to fit the car...further in or out. For OD stay at 30.7” max.
I run a 30.4” tall 305/35 on a 22x10.5 at +30 offset. This is as far as you can push a wheel out and be flush with the fender...and it’s IMHO the perfect fit for these especially with a drop. View attachment 3977
What is the bolt pattern? And would you assume it would be the same on a 2021?
 

Messages
45
Reactions
9
Points
2
Location
Cincinnati, OH, USA
#28
5x114.3

Hub is 70.5


Sent from my iPhone using Tapatalk
OK, what would a +40mm offset versus +30mm do? What does 10mm do? I am having trouble locating wheels i like that are +30. Most are +38-+40mm.
 

UNBROKEN

4000 Post Club
Messages
4,169
Reactions
4,835
Points
352
Location
Houston, TX, USA
#29
OK, what would a +40mm offset versus +30mm do? What does 10mm do? I am having trouble locating wheels i like that are +30. Most are +38-+40mm.
With those numbers that wheel would be 10mm further inset than a +30. Or just shy of 1/2”. Doesn’t sound like much but it makes a big difference visually. If you’re looking for 10.5” wheels at +30 you’re not gonna find them on the shelf anywhere. That’s a custom offset for people having forged wheels built. You can get real close though, I’ve seen some Vossen wheels at +32 and many at +35. You could also add a 4-6mm slip on spacer to the +35 wheels to bring them out flush. The rear wheels are roughly 1/4” further inset at the top compared to the front...if you really wanna get them even you can set the rear camber to -.5* then they’ll match the front.
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#30
Or you could buy my setup and not worry about rubbing at all (y)
 

Messages
29
Reactions
19
Points
2
Location
Livonia, MI
#31
22x10.5 +32 offset. Tires are P-zero 305/40. Not lowered, yet. No rub and as you can see the best wheel on this forum.
 

Attachments

Messages
290
Reactions
108
Points
37
Location
Bear, DE, USA
#33
Love our 22’s. Went 22 when I found out the aviator runs them. The wider wheel makes the stance much better I think too.
what are the wheel and tire specs here?
 

Messages
153
Reactions
118
Points
37
Location
Plano, TX, USA
#34
what are the wheel and tire specs here?
I pulled that picture off a post I saw from a magazine. I blew up the picture and it looks like they might be stock 275/45/21's. They obviously either dropped it WAY down or made some custom fender flares.
 

Messages
290
Reactions
108
Points
37
Location
Bear, DE, USA
#35
I pulled that picture off a post I saw from a magazine. I blew up the picture and it looks like they might be stock 275/45/21's. They obviously either dropped it WAY down or made some custom fender flares.
Thats definitely a render you can tell by no depth in the wheels to the calipers.
 

Messages
342
Reactions
197
Points
37
Location
Buffalo, NY, USA
#36
Definitely going to start pricing out 22" for when I need tires on my stock 20s.. where is the best place to look for rims for the Explorer? Are people going custom are pre-manufactured?

Definitely going to snag the specs of UNBROKENs stance but a different rim style.
 

Messages
342
Reactions
197
Points
37
Location
Buffalo, NY, USA
#37
Start with picking a wheel width...then you can figure offset from there for how you want the wheel to fit the car...further in or out. For OD stay at 30.7” max.
I run a 30.4” tall 305/35 on a 22x10.5 at +30 offset. This is as far as you can push a wheel out and be flush with the fender...and it’s IMHO the perfect fit for these especially with a drop. View attachment 3977
This is by far the most perfect stance I've seen.. so I'll be copying the specs of the tires and rim size and offset.. but will grab a different rim.. dont worry my friend haha

Where'd you grab them?
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#39
Maybe I'm just biased but looks pretty good minus the rake to the front........... spoiler6.jpg
 

F=MA

Active Member
Messages
899
Reactions
576
Points
232
Location
Wichita, KS, USA
#40
They may have sliced off a half turn of the front springs.
 



Top