Recent content by KJE

Seat

I will have a look for the packing boxes the modules and harnesses came in and snap some shots and post them for you Your dealership appear to be ignorant or less than helpful, most likely a combination of both

The parts number on the two modules were respectively LU5T-14F042-AK PFSM and JU5T-14C724-BA The two complete wiring harnesses labels read FAWBBs/n 000083 and M1MT-14B687 BDA I don’t have the details re the seat belt anchor sensors as I removed my own from the seats as the dealer had back...

They were the modules under both outer seats and all three seat belt anchor sensors together with the two plug and play harnesses and all where OEM purchased from the local Ford dealer

It took longer than I had anticipated including waiting for parts I did remove all three seats built an aluminum frame to support a floor and front section to prevent dogs going into the front seat area and fitted a Setina cargo barrier and door protectors. I had to purchase two modules and seat...

Appreciate the suggestions and the link. Unusual to find a UK site offering this information. I used this site https://www.wheel-size.com/calc/and also complimented blaster 9 on his work, planning to go a similar route at the start. At one point had even considered getting the 18" PIU unit...

Agreed. I usually work on trucks where I have more rubber on the sidewall and also forgot to take into account the shorter the aspect ratio, the closer the tread width has to match that of the wheel. I’ll just keep looking for rims

Got the new edition to our family at the beginning of this month and was initially planning to run 18” aftermarkets and ordered a set and dry fitted a tire, but they just didn’t look good in the flesh and since then, haven’t been able to find a rim I really liked better than the stockers, so...

I don’t believe in luck – it was meant to be and looks perfect - props I’m told that my rims are heading North from your US of A and I am fortunate to have a good tire guy who will fit one tire/size of my choice on the rim and leave the labels on for me to take back and try on the vehicle – to...

(y)

Got the ST yesterday and as you said, not much space to work with under that wheel well. I’m looking at the Black Rhino Arsenals in 18” also with 30 offset which I think is the same as yours. Looking for quiet tires and have always run Toyo A/T’s as they were real quiet, but all other vehicles...

Again, I appreciate. I too have been first guy out the gate with grinding wheel and plasma cutter on a number of cars and trucks I have modified in the past, so it’s real nice to be able to benefit from someone sharing the results of their efforts for a change.

Appreciate all the information

Oh my bubble has been burst many times. You might well be right as you have been there. I’ll wait till I get mine, pop it on the hoist and see how much clearance there is for between the tire and the bottom perch and what lies behind the fender liner, I’m thinking on the cab side probably the...

Nice job, more rubber less rim has always been my philosophy too. I’m hoping to get my vehicle ( Black also) in a few weeks and fit the Black Rhino Arsenal 18” with Toyo Open Road A/T 3 in either 285/65/18 or if it will fit even with minor trimming the 305/65/18 - then go for the flat top look...