Recent content by ANawaz

This feature was also added to the job-2 25 Explorer Platinum trim. It'll be great if we can enable it on Job 1 STs. Sent from my SM-S918W using Tapatalk

So, here are the results of my short testing sessions 1- Drove for 10 mins > Engine off > Opened hatch using the button below leftside of steering wheel > Closed hatch > Waited for hatch to close > Walked away = Walk Away Lock with visual and auditory feedback (WAL/VAF) worked 2- Came back to a...

I'll test the rear hatch again to check different scenarios. However, there's no separate lock for the hatch. If doors lock, so does the hatch. I've had success with all doors locking with walk away lock alongside visual and audible feedback. The only time it did not work at all was when I had...

Yes. It's available in the BCM using forscan under PowerPoint timeout (s) Sent from my SM-S918W using Tapatalk

Now that I think about it, I hit the lock and close hatch button before walking away as well. The only reason I didn't press lock is because I was testing the walk away lock function. Sent from my SM-S918W using Tapatalk

Confirmed. Walk away lock horn chirp is working after those changes to BCM Sent from my SM-S918W using Tapatalk

I'll test this as well. If you open the rear hatch after turning off the engine and then walk away after closing the hatch, does the walk-away lock still work? It does not work for me in this scenario.

I took inspiration from the screenshot you shared for the global close for the 20-23 MY and got it to work. Here are the details at the other thread. https://www.explorerst.org/index.php?posts/104555 Sent from my SM-S918W using Tapatalk

I got the global window close (for front windows) to work. It works by double pressing the lock button on the fob and holding on the second press. This process did not work per the factory settings as only global open worked when enabled in the settings>Vehicle>Windows. Here are the forscan...

Also enabled welcome lights on approaching the vehicle with the keyfob. Confirmed to be working.

I attempted these changes as well and can confirm that the walk-away lock works with the lights flashing for confirmation. Audible confirmation does not work.

With the changes to APIM 7D0-09-05, do you still have lane keep/centering and blue cruise working? One or more of the 5 mods I did to APIM led to those drive assistance features disappearing even though enabled in settings.

I checked yesterday, the registers mentioned for the 20-23MY for the PDM and DDM do not exist in my 2025 Explorer ST.

I did test it by not locking the car after closing the door and walking away from the car. As it did not chirp the horn or flash the indicators, I assumed it did not work as the mirrors also stayed unfolded.

It just enlarges that side camera view.